P/N +描述+內容搜索

[MYSON TECHNOLOGY]

GENERAL DESCRIPTION
The MTU410 is a single chip 4-Bit microcontroller with LCD drivers. It can drive up to 3 common times or 25 segments, i.e. a 75-segment LCD driver. This 4-Bit microcontroller contains a 4-Bit parallel processing ALU, 1024 x 15-bit program ROM, 64 x 4-Bit data RAM, input/output ports, alarm Driver, timer, clock generator, crystal and RC oscillator circuit, LCD driver and 79 powerful instructions in a single chip. The HALT instruction can be used to stop all internal operations other than timer, clock generator, crystal/RC oscillator and LCD driver. Very low current dissipation can be easily achieved by combining 4 kinds of interrupt functions and HALT instruction to minimize the operation cycle.

FEATURES
• Very low current dissipation.
• Wide operating voltage range.
• Supports both Ag and Li batteries.
• Powerful instruction set.
• 4-level subroutine nesting (including interrupt).
• 4 event driven interrupts, 2 external and 2 internal.
• ROM size: 1024 x 15 bits.
• RAM size: 64 x 4 bits.
• Input ports: 2 ports/ 8 pins (S and M).
• Output port: 1 port/ 4 pins (P).
• Pseudo serial output port (P).
• Input/output ports: 2 ports/ 8 pins (I/OA and I/OB).
• Control outputs: ALARM, LIGHT.
• LCD driver outputs (can drive up to 75 LCD segments).
• Mask option to select 4 LCD drive modes: static, duplex (1/2 duty 1/2 bias, 1/3 duty 1/2 bias or 1/3 duty 1/3 bias).
• Mask option permits LCD driver output pins to be used for DC output ports; up to 25 pins are available.
• Segment PLA circuit permits any layout on LCD panel.
• Built-in clock generator (crystal or RC).
• Built-in voltage doubler, halver, tripler.

GENERAL DESCRIPTION
TheAPU4006is a single-chip 4-Bit microcontroller with LCD drivers. It can drive up to 3 common time 20 segments, i.e. 60 segments LCD driver. This 4-Bit microcontroller contains a 4-Bit parallel processing ALU, 1024 x 15-bit program ROM, 48 x 4-Bit data RAM, input ports, alarm Driver, timer, clock generator, crystal and RC oscillator circuit, LCD driver and 70 powerful instructions in a single chip. It uses HALT instruction to stop all internal operations other than the timer, clock generator, crystal/RC oscillator and LCD driver. Very low current dissipation can be easily achieved by combining 4 types of interrupt function and HALT instruction to minimize the operation cycle.

FEATURES
• Very low current dissipation.
• Wide operating voltage range.
• Supports both Ag and Li batteries.
• Powerful instruction set.
• 4-level subroutine nesting (including interrupt).
• 4 event driven interrupts, 2 external and 2 internal.
• ROM size: 1024 x 15 bits.
• RAM size: 48 x 4 bits.
• Input ports: 1 port/ 4 pins (M-PORT).
• Control output: ALARM.
• LCD driver outputs (can drive up to 60 LCD segments).
• Mask option to select 3 LCD drive modes: static, duplex 1/2 duty 1/2 bias, 1/3 duty 1/2 bias.
• Mask option permits LCD driver output pins to be used for DC output ports. Up to 20 pins are available. SEG13-SEG20 can be selected by open-drain output.
• Segment PLA circuit permits any layout on the LCD panel.
• Built-in clock generator (crystal or RC).
• Built-in voltage doubler, halver.

GENERAL DESCRIPTION
The MTU410 is a single chip 4-Bit microcontroller with LCD drivers. It can drive up to 3 common times or 25 segments, i.e. a 75-segment LCD driver. This 4-Bit microcontroller contains a 4-Bit parallel processing ALU, 1024 x 15-bit program ROM, 64 x 4-Bit data RAM, input/output ports, alarm Driver, timer, clock generator, crystal and RC oscillator circuit, LCD driver and 79 powerful instructions in a single chip. The HALT instruction can be used to stop all internal operations other than timer, clock generator, crystal/RC oscillator and LCD driver. Very low current dissipation can be easily achieved by combining 4 kinds of interrupt functions and HALT instruction to minimize the operation cycle.

FEATURES
• Very low current dissipation.
• Wide operating voltage range.
• Supports both Ag and Li batteries.
• Powerful instruction set.
• 4-level subroutine nesting (including interrupt).
• 4 event driven interrupts, 2 external and 2 internal.
• ROM size: 1024 x 15 bits.
• RAM size: 64 x 4 bits.
• Input ports: 2 ports/ 8 pins (S and M).
• Output port: 1 port/ 4 pins (P).
• Pseudo serial output port (P).
• Input/output ports: 2 ports/ 8 pins (I/OA and I/OB).
• Control outputs: ALARM, LIGHT.
• LCD driver outputs (can drive up to 75 LCD segments).
• Mask option to select 4 LCD drive modes: static, duplex (1/2 duty 1/2 bias, 1/3 duty 1/2 bias or 1/3 duty 1/3 bias).
• Mask option permits LCD driver output pins to be used for DC output ports; up to 25 pins are available.
• Segment PLA circuit permits any layout on LCD panel.
• Built-in clock generator (crystal or RC).
• Built-in voltage doubler, halver, tripler.

GENERAL DESCRIPTION
The MTU418 is a single-chip 4-Bit microcontroller with LCD drivers. It can drive up to 3 common time 20 segments, i.e. 60 segments LCD driver. This 4-Bit microcontroller contains a 4-Bit parallel processing ALU, 1024 x 15-bit program ROM, 48 x 4-Bit data RAM, input ports, alarm Driver, timer, clock generator, crystal and RC oscillator circuit, LCD driver and 70 powerful instructions in a single chip. It uses HALT instruction to stop all internal operations other than the timer, clock generator, crystal/RC oscillator and LCD driver. Very low current dissipation can be easily achieved by combining 4 types of interrupt function and HALT instruction to minimize the operation cycle.

FEATURES
• Very low current dissipation.
• Wide operating voltage range.
• Supports both Ag and Li batteries.
• Powerful instruction set.
• 4-level subroutine nesting (including interrupt).
• 4 event driven interrupts, 2 external and 2 internal.
• ROM size: 1024 x 15 bits.
• RAM size: 48 x 4 bits.
• Input ports: 1 port/ 4 pins (M-PORT).
• Control output: ALARM.
• LCD driver outputs (can drive up to 60 LCD segments).
• Mask option to select 3 LCD drive modes: static, duplex 1/2 duty 1/2 bias, 1/3 duty 1/2 bias.
• Mask option permits LCD driver output pins to be used for DC output ports. Up to 20 pins are available. SEG13-SEG20 can be selected by open-drain output.
• Segment PLA circuit permits any layout on the LCD panel.
• Built-in clock generator (crystal or RC).
• Built-in voltage doubler, halver.

General Description
The APU4003 is a single chip 4-Bit Micro-Controller with LCD drivers. It can drive up to 3 common times or 25 segments, i.e. a 75-segment LCD driver. This 4-Bit Micro-Controller contains a 4-Bit parallel processing ALU, 1024x15-bit program ROM, 64x4-Bit data RAM, input/output ports, alarm Driver, timer, clock generator, crystal and RC oscillator circuit, LCD driver and 79 powerful instructions in a single chip. The HALT instruction can be used to stop all internal operations other than timer, clock generator, crystal/RC oscillator and LCD driver. Very low current dissipation can be easily achieved by combining 4 kinds of interrupt functions and HALT instruction to minimize the operation cycle.

Features
• Very low current dissipation
• Wide operating voltage range
• Supports both Ag and Li batteries
• Powerful instruction set
• 4-level subroutine nesting (including interrupt)
• 4 event driven interrupts, 2 external and 2 internal
• ROM size: 1024x15 bits
• RAM size: 64x4 bits
• Input ports: 2 ports/8 pins (S and M)
• Output port: 1 port/4 pins (P)
• Pseudo serial output port (P)
• Input/output ports: 2 ports/8 pins (I/OA and I/OB)
• Control outputs: ALARM, LIGHT
• LCD driver outputs (can drive up to 75 LCD segments)
• Mask option to select 4 LCD drive modes: static, duplex (1/2 duty 1/2 bias, 1/3 duty 1/2 bias or 1/3 duty 1/3 bias)
• Mask option permits LCD driver output pins to be used for DC output ports; up to 25 pins are available
• Segment PLA circuit permits any layout on LCD panel
• Built-in clock generator (crystal or RC)
• Built-in voltage doubler, halver, tripler

General Description
The APU4003T is an EEPROM-equipped high- performance 4-Bit microcomputer. It contains not only all functions compatible with APU4003T, but also an EEPROM, providing customers such conveniences as on-board verification, customized code, small quantity sample production, etc.
This chip especially provides a security bit to protect the customer’s code.

Features
• Very low current dissipation.
• Wide operating voltage range.
• Supports both Ag and Li batteries.
• Powerful instruction set.
• 4-level subroutine nesting (including interrupt).
• 4 event-driven interrupts, 2 external and 2 internal.
• ROM size: 1024x15 bits.
• RAM size: 64x4 bits.
• Input ports: 2 ports/ 8 pins (S and M).
• Output port: 1 port/ 4 pins (P).
• Pseudo serial output port (P).
• Input/Output ports: 2 ports/ 8 pins (I/OA and I/OB).
• Control outputs: ALARM, LIGHT.
• LCD driver outputs (can drive up to 75 LCD segments).
• PROM option to select 4 LCD drive modes: static, duplex (1/2 duty 1/2 bias, 1/3 duty 1/2 bias or 1/3 duty 1/3 bias).
• PROM option permits LCD driver output pins to be used for DC output ports; up to 25 pins are available.
• Segment PLA circuit permits any layout on LCD panel.
• Built-in clock generator (crystal or RC).
• Built-in voltage doubler, halver, tripler.
• Endurance: More then 100 write cycles/word.
• Security bit for read/write protection.

GENERAL DESCRIPTION
The MTU413 is an EEPROM-equipped high-performance 4-Bit microcomputer. It contains not only all functions compatible with MTU410, but also an EEPROM , providing customers such conveniences as on-board verification, customized code, small quantity sample production, etc.
This chip especially provides a security bit to protect the customer’s code.

FEATURES
• Very low current dissipation.
• Wide operating voltage range.
• Supports both Ag and Li batteries.
• Powerful instruction set.
• 4-level subroutine nesting (including interrupt).
• 4 event-driven interrupts, 2 external and 2 internal.
• ROM size: 1024 x 15 bits.
• RAM size: 64 x 4 bits.
• Input ports: 2 ports/ 8 pins (S and M).
• Output port: 1 port/ 4 pins (P).
• Pseudo serial output port (P).
• Input/Output ports: 2 ports/ 8 pins (I/OA and I/OB).
• Control outputs: ALARM, LIGHT.
• LCD driver outputs (can drive up to 75 LCD segments).
• PROM option to select 4 LCD drive modes: static, duplex (1/2 duty 1/2 bias, 1/3 duty 1/2 bias or 1/3 duty 1/3 bias).
• PROM option permits LCD driver output pins to be used for DC output ports; up to 25 pins are available.
• Segment PLA circuit permits any layout on LCD panel.
• Built-in clock generator (crystal or RC).
• Built-in voltage doubler, halver, tripler.
• Endurance : More then 100 write cycles/word.
• Security bit for read/write protection.

[MYSON TECHNOLOGY]

GENERAL DESCRIPTION
The MTU420 is an LCD driver with an embedded high-performance 4-Bit microcomputer. It contains all the necessary functions in a single chip: dual clock, 4-Bit parallel processing ALU, ROM, RAM, input/output ports, timer, clock generator, LCD Driver, look-up table and watchdog timer. The set of 118 instructions includes not only 4-Bit operation and manipulation instruction but also various conditional branch instructions, and LCD driver data transfer instructions that are powerful and easy to follow. The halt function stops internal operations other than the oscillator, divider and LCD driver in order to minimize power dissipation. The stop function stops all clocks in the chip.

FEATURES
• Wide operating voltage range:
• 118 instruction sets:
   - Binary addition, subtraction, BCD adjustment, logical operation in direct addressing mode and index addressing mode.
   - Single-bit manipulation (set, reset, decision for branch).
   - 4-Bit input/output.
   - Various conditional branches.
   - 16 working registers and manipulation.
   - LCD driver data transfer.
   - Look-up table.
   - Programmable option.
   - System clock selection.
• 8-level subroutine nesting.
• Interrupt function:
   - External factor: 2 (INT pin or ports S, M).
   - Internal factor: 2 (timer, divider).
• ROM/RAM capacity:
   - ROM capacity . . . . . 2048 x 16 bits.
   - RAM capacity . . . . . 128 x 4 bits.
• Watchdog timer.
• Input/Output ports:
   - Input ports . . . . . 2 ports/8pins (S, M).
   - Output port . . . . . 1 port/4pins (P).
   - Pseudo serial output port . . . . . Also used for output port.
   - Input/Output ports . . . . . 2 ports/8pins (I/OA, I/OB).
• 2 control outputs . . . . . light, alarm.
• LCD driver output:
   - 26 LCD driver outputs (up to 156 LCD segments are drivable).
   - Mask option is used to select static ½ duty, ½ bias ½ duty, ½ bias 1/3 duty, ½ bias ¼ duty, 1/3 bias 1/3 duty, ½ bias ¼ duty and 1/3 bias 1/6 duty drive modes of the LCD panel.
   - Mask option permits LCD driver output pins to be used for output ports.
   - Segment PLA circuit permits any layout on the LCD panel.
• Built-in doubler, halver, tripler.
• One 6-bit timer with programmable option clock.
• 128-byte look-up table for LCD display pattern or 256-nibble look-up table for general purpose.
• Halt function.
• Stop function.
• Dual clock operation.

GENERAL DESCRIPTION
The MTU420 is an LCD driver with an embedded high-performance 4-Bit microcomputer. It contains all the necessary functions in a single chip: dual clock, 4-Bit parallel processing ALU, ROM, RAM, input/output ports, timer, clock generator, LCD Driver, look-up table and watchdog timer. The set of 118 instructions includes not only 4-Bit operation and manipulation instruction but also various conditional branch instructions, and LCD driver data transfer instructions that are powerful and easy to follow. The halt function stops internal operations other than the oscillator, divider and LCD driver in order to minimize power dissipation. The stop function stops all clocks in the chip.

FEATURES
• Wide operating voltage range:
• 118 instruction sets:
   - Binary addition, subtraction, BCD adjustment, logical operation in direct addressing mode and index addressing mode.
   - Single-bit manipulation (set, reset, decision for branch).
   - 4-Bit input/output.
   - Various conditional branches.
   - 16 working registers and manipulation.
   - LCD driver data transfer.
   - Look-up table.
   - Programmable option.
   - System clock selection.
• 8-level subroutine nesting.
• Interrupt function:
   - External factor: 2 (INT pin or ports S, M).
   - Internal factor: 2 (timer, divider).
• ROM/RAM capacity:
   - ROM capacity . . . . . 2048 x 16 bits.
   - RAM capacity . . . . . 128 x 4 bits.
• Watchdog timer.
• Input/Output ports:
   - Input ports . . . . . 2 ports/8pins (S, M).
   - Output port . . . . . 1 port/4pins (P).
   - Pseudo serial output port . . . . . Also used for output port.
   - Input/Output ports . . . . . 2 ports/8pins (I/OA, I/OB).
• 2 control outputs . . . . . light, alarm.
• LCD driver output:
   - 26 LCD driver outputs (up to 156 LCD segments are drivable).
   - Mask option is used to select static ½ duty, ½ bias ½ duty, ½ bias 1/3 duty, ½ bias ¼ duty, 1/3 bias 1/3 duty, ½ bias ¼ duty and 1/3 bias 1/6 duty drive modes of the LCD panel.
   - Mask option permits LCD driver output pins to be used for output ports.
   - Segment PLA circuit permits any layout on the LCD panel.
• Built-in doubler, halver, tripler.
• One 6-bit timer with programmable option clock.
• 128-byte look-up table for LCD display pattern or 256-nibble look-up table for general purpose.
• Halt function.
• Stop function.
• Dual clock operation.

DESCRIPTION

The µPD75316(A) is one of the 75X Series 4-Bit single-chip microcomputer having a built-in LCD controller/Driver, and has a data processing capability comparable to that of an 8-bit microcomputer.

In addition to high-speed operation with 0.95 µs minimum instruction execution time for the CPU, the µPD75316(A) can also process data in 1-, 4-, and 8-bit units. Therefore, as a 4-Bit single-chip microcomputer chip having a built-in LCD panel controller/Driver, its data processing capability is the highest in its class in the world.