LC89962 查看數據表（PDF） - SANYO -> Panasonic

零件编号

产品描述 (功能)

比赛名单

LC89962

NTSC Format Delay Line

SANYO -> Panasonic 

LC89962, LC89962M

4. Measure the differential gain (DG) and differential phase (DP) using a vector scope with a 5-step function wave

input. (See the following figure.)

5. To measure LS, input a 5-step function wave and measure the ratio of the sync level (S) to the luminance level (Y).

LS

=

S [mV]

————

×

100

[%]

Y [mV]

6. To measure clock leakage (Lck), measure the 4fsc (14.3 MHz) component in the output signal with a spectrum

analyzer when no input signal is presented.

7. To measure the noise level (NO), measure the noise output in the OUT pin output when no input signal is present

with a video noise meter. Set up the noise meter with a 200-kHz high-pass filter, a 4.2-MHz low-pass filter, and

3.58-MHz trap filter.

8. The following formula is used to calculate the output impedance (ZO).

ZO

=

V1 [mVp-p] – V2 [mVp-p]

———————————

V2 [mVp-p]

×

500

[Ω]

Output signal symbol

V1

V2

SW3

a

b

Input signal

Sine wave: 200 kHz, 500 mV p-p

9. To measure the delay time (TD), measure the delay time of the output signal to the input signal. In this measurement,

the delay time associated with the low-pass filter must be excluded.

No. 5420-3/6

Share Link: