74ABT2953 查看數據表（PDF） - Philips Electronics
零件编号
产品描述 (功能)
比赛名单
74ABT2953 Datasheet PDF : 6 Pages
| |||
Philips Semiconductors
Octal registered transceiver, inverting (3-State)
Product specification
74ABT2953
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
VCC
VI
VIH
VIL
IOH
IOL
∆t/∆v
Tamb
DC supply voltage
Input voltage
High-level input voltage
Low-level Input voltage
High-level output current
Low-level output current
Input transition rise or fall rate
Operating free-air temperature range
LIMITS
Min
Max
4.5
5.5
0
VCC
2.0
0.8
–32
64
0
10
–40
+85
UNIT
V
V
V
V
mA
mA
ns/V
°C
DC ELECTRICAL CHARACTERISTICS
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
Tamb = +25°C
Tamb = –40°C
to +85°C
UNIT
Min Typ Max Min Max
VIK
Input clamp voltage
VOH High-level output voltage
VOL
VRST
Low-level output voltage
Power-up output low
voltage3
VCC = 4.5V; IIK = –18mA
VCC = 4.5V; IOH = –3mA; VI = VIL or VIH
VCC = 5.0V; IOH = –3mA; VI = VIL or VIH
VCC = 4.5V; IOH = –32mA; VI = VIL or VIH
VCC = 4.5V; IOL = 64mA; VI = VIL or VIH
VCC = 5.5V; IO = 1mA; VI = GND or VCC
–0.9 –1.2
–1.2 V
2.5 3.2
2.5
V
3.0 3.7
3.0
V
2.0 2.3
2.0
V
0.42 0.55
0.55 V
0.13 0.55
0.55 V
II
Input leakage Control pins VCC = 5.5V; VI = GND or 5.5V
current
Data pins VCC = 5.5V; VI = GND or 5.5V
±0.01 ±1.0
±5 ±100
±1.0 µA
±100 µA
IOFF Power-off leakage current
VCC = 0.0V; VO or VI ≤ 4.5V
±5.0 ±100
±100 µA
IPU/IPD
Power-up/down 3-State
output current4
VCC = 2.1V; VO = 0.5V; VI = GND or VCC;
V OE = Don’t care
±5.0 ±50
±50 µA
IOZH 3-State output High current VCC = 5.5V; VO = 2.7V; VI = VIL or VIH
5.0 50
50
µA
IOZL
3-State output Low current
VCC = 5.5V; VO = 0.5V; VI = VIL or VIH
–5.0 –50
–50 µA
ICEX Output High leakage current VCC = 5.5V; VO = 5.5V; VI = GND or VCC
5.0 50
50
µA
IO
Output current1
VCC = 5.5V; VO = 2.5V
–50 –65 –180 –50 –180 mA
ICCH
VCC = 5.5V; Outputs High, VI = GND or VCC
110 250
250 µA
ICCL Quiescent supply current
VCC = 5.5V; Outputs Low, VI = GND or VCC
20
30
30 mA
ICCZ
VCC = 5.5V; Outputs 3-State;
VI = GND or VCC
110 250
250 µA
∆ICC
Additional supply current per VCC = 5.5V; one input at 3.4V,
input pin2
other inputs at VCC or GND
0.3 1.5
1.5 mA
NOTES:
1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
2. This is the increase in supply current for each input at 3.4V.
3. For valid test results, data must not be loaded into the flip-flops (or latches) after applying the power.
4. This parameter is valid for any VCC between 0V and 2.1V, with a transition time of up to 10msec. From VCC = 2.1V to VCC = 5V ± 10% a
transition time of up to 100µsec is permitted.
1995 Sep 06
4
Share Link: 