MK50H27(1997) 查看數據表（PDF） - STMicroelectronics
零件编号
产品描述 (功能)
比赛名单
MK50H27 Datasheet PDF : 56 Pages
| |||
4.1.1.2 Register Data Port (RDP)
MK50H27
1111110000000000
5432109876543210
CSR
DATA
BIT
15:00
NAME
DESCRIPTION
CSR DATA Writing data to the RDP loads data into the CSR selected by RAP. Reading the data from
RDP reads the data from the CSR selected in RAP.
4.1.2 Control and Status Register Definition
4.1.2.1 Control and Status Register 0 (CSR0)
RAP<3:1> = 0
1111110000000000
5432109876543210
T
D
P
O
D
D
T
X
R
X
I
N
I
N
M
E
M
I
R
T
P
I
T
I
R
I
TR
OU
0
MF X X OOE T R S R R N N N
DF
NNARRS
TTT
BIT NAME
15 TDMD
14 POFF
13 DTX
DESCRIPTION
TRANSMIT DEMAND, when set, causes MK50H27 to access the
Transmit Descriptor Ring without waiting for the transmit polltime inter-
val to elapse. TDMD need not be set to transmit a MSU, it merely has-
tens MK50H27’s response to a Transmit Descriptor Ring entry inser-
tion by the host. TDMD is Write With ONE ONLY and cleared by the
microcode after it is used. It may read as a ”1” for a short time after it
is written because the microcode may have been busy when TDMD
was set. It is also cleared by Bus RESET. Writing a ”0” in this bit has
no effect.
POFF, when set, indicates that MK50H27 is operating in the Power Off
phase of operation. All external activity is disabled and internal logic is
reset. MK50H27 remains inactive except for primitive processing until
a Power On primitive is issued. POFF IS READ ONLY and set by Bus
RESET or a Power Off primitive. Writing to this bit has no effect.
Transmitter ring disable prevents the MK50H27 from further access to
the Transmitter Descriptor Ring and terminates transmitter polling. No
transmissions are attempted after finishing transmission of any signal
unit in transmission at the time of DTX being set. TXON acknow-
ledges changes to DTX, see below. DTX is READ/WRITE.
15/56
Share Link: 