050-307-7304229 查看數據表（PDF） - ITT Cannon

零件编号

产品描述 (功能)

比赛名单

050-307-7304229

RF Coaxial Connectors

ITT Cannon  

RF Coaxial Connectors

Assembly Instructions

AI-504 & BAI-003 SMB/SMC & SMS Straight Connectors, Crimp Type for Braided Cable

CRIMP FERRULE

REAR BODY

REAR INSULATOR

CONTACT

FRONT

INSULATOR

FRONT

BODY

1. Slide ferrule on cable, (and tubing with SMS)

2. Trim cable to dimensions shown taking care not to nick braid or center conductor.

Assembly Instruction No.

BAI-003

AI-504

A

15,50 (.610)

17,01 (.672)

B

9,50 (.374)

11,13 (.438)

C

2,50 (.098)

3,18 (.125)

3. Tin center conductor (DO NOT OVER TIN).

4. Slide rear body over cable dielectric and under the braid until the braid is flush against the rear of

the hexagonal nut.

NOTE: When using cables with inflexible jackets two 3,17 (.125) slits in the outer jacket are

permissible.

5. Slide on rear insulator so that the counterbore rests against the cable dielectric.

6. Place a small solder preform made from 0,26 - 0,31 (.010 - .012) dia (28 swg) multi-core solder

in rear of contact.

7. Assemble contact on center conductor, heat to make solder connection ensuring shoulder of

contact is flush against rear insulator.

N.B. Do not allow solder to protrude outside spill hole.

8. Slide ferrule against body and crimp using ITT Cannon Crimp Tool and suitable die set (see table

below).

9. Slide on front insulator (if not already assembled in body).

10. Screw on front body and tighten to 0,63 - 0,70 Nm (90 - 100 in. ozs.).

11. On SMS slip tubing over the ferrule and heat until the shrinkable tubing fits smoothly around the

cable.

Only common cable retention features are shown in detail. Various body configurations can

apply.

Cable Type

RG142/U

RG196/U

RG316/U

RD316

Cable Code

9052

3196

0000/9416

9399

Die Size

5,41 (.213)

2,67 (.105)

3,25 (.128)

3,84 (.151)

122

Dimensions are shown in mm (inch)

Dimensions subject to change

Share Link: