MAX4674EUE(2002) 查看數據表（PDF） - Maxim Integrated
零件编号
产品描述 (功能)
比赛名单
MAX4674EUE Datasheet PDF : 13 Pages
| |||
3V/5V, 4Ω, Wideband Quad
2:1 Analog Multiplexer
ABSOLUTE MAXIMUM RATINGS
V+, A0, EN................................................................-0.3V to +6V
COM_, NO_, NC_ (Note1)...............................-0.3V to (V + 0.3V)
Continuous Current COM_, NO_, NC_ ..........................±100mA
Peak Current (COM_, NO_, NC_)
(pulsed at 1ms, 10% duty cycle) ..............................±300mA
Continuous Power Dissipation (TA = +70°C)
16-Pin QSOP (derate 8.3mW/°C above +70°C) ........ 667mW
16-Pin TSSOP (derate 6.7mW/°C above +70°C) .......533mW
16-Pin Narrow SO (derate 8mW/°C above +70°C) ....640mW
16-Pin QFN (derate 18.5mW/°C above +70°C) ........1481mW
20-Pin QFN (derate 20mW/°C above +70°C) ...........1600mW
Operating Temperature Range
MAX4674E_E .................................................-40°C to +85°C
Die Temperature ..............................................................+150°C
Storage Temperature Range ............................-65°C to +150°C
Lead Temperature (soldering, 10s) ................................+300°C
Note 1: Signals on NO_, NC_, and COM_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to max-
imum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(V+ = +4.5V to +5.5V, VIH = 2.4V, VIL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values at TA = +25°C.) (Notes 2, 9)
PARAMETER
ANALOG SWITCH
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Analog Signal Range
VCOM_,VNO_,
VNC_
On-Resistance
RON
V+ = 4.5V, ICOM_ = 10mA,
VNO_ or VNC_ = 0 to V+
TA = +25°C
TA = TMIN to
TMAX
On-Resistance Match Between
Channels (Notes 3, 8)
∆RON
V+ = 4.5V, ICOM_ = 10mA,
VNO_ or VNC_ = 0 to V+
TA = +25°C
TA = TMIN to
TMAX
On-Resistance Flatness
(Note 4)
RFLAT (ON)
V+ = 4.5V, ICOM_ = 10mA,
VNO_ or VNC_ = 0 to V+
TA = +25°C
TA = TMIN to
TMAX
NO_, NC_ Off-Leakage
Current (Note 5)
INO_(OFF),
INC_(OFF)
V+ = 5.5V; VCOM_ = 1V,
4.5V; VNO_ or VNC_ = 4.5V,
1V
TA = +25°C
TA = TMIN to
TMAX
COM_ Off-Leakage Current
(Note 5)
ICOM_(OFF)
V+ = 5.5V; VCOM_ = 1V,
4.5V; VNO_ or VNC_ = 4.5V,
1V
TA = +25°C
TA = TMIN to
TMAX
COM_ On-Leakage Current
(Note 5)
DIGITAL I/O (A0, EN)
ICOM_(ON)
V+ = 5.5V; VCOM_ = 1V,
4.5V; VNO_ or VNC_ = 1,
4.5V, or floating
TA = +25°C
TA = TMIN to
TMAX
Input Logic High
Input Logic Low
Input Leakage Current
VIH
VIL
IIN
VIN = 0 or +5.5V
DYNAMIC
Turn-On Time (Note 5)
VNO_ or VNC_ = 3V,
TA = +25°C
tON
RL = 100Ω, CL = 35pF,
TA = TMIN to
Figure 2
TMAX
0
V+
V
2.2
4
Ω
5
0.15 0.4
Ω
0.5
0.5
0.8
Ω
1
0.5 ±0.01 0.5
nA
-1
1
0.5 ±0.01 0.5
nA
-1
1
0.5 ±0.01 0.5
nA
-1
1
2.4
-0.5
1
V
0.8
V
0.5
µA
10
18
ns
20
2 _______________________________________________________________________________________
Share Link: 