1x/1.5x/2x White LED Charge Pump with
Two LDOs in 4mm x 4mm TQFN
Table 3. Recommended Components for Figure 2
DESIGNATION
C1, C5
C3, C4, C6, C7
C8
D1–D4
D5 (D5–D8)
RSETM, RSETF
VALUE
10µF
1µF
0.01µF
—
—
As
required
MANUFACTURER
TDK
TDK
TDK
Nichia
Nichia
Panasonic
Vishay
PART
C2012X5R0J106M
C1005X5R0J105M
C1005X7R1E103K
NSCW215T
NBCW011T
—
DESCRIPTION
10µF ±20%, 6.3V X5R ceramic capacitors (0805)
1µF ±20%, 6.3V X5R ceramic capacitors (0402)
0.01µF ±10%, 25V X7R ceramic capacitor (0402)
White LEDs
White LEDs, 4 LEDs in one package
1% resistors
PCB Layout and Routing
The MAX8645X/MAX8645Y are high-frequency,
switched-capacitor voltage regulators. For best circuit
performance, use a solid ground plane and place CIN,
COUT, C3, and C4 as close as possible to the IC. There
should be no vias on CIN. Connect GND and PGND to
the exposed paddle directly under the IC. Refer to the
MAX8645Y evaluation kit for an example.
PROCESS: BiCMOS
Chip Information
Package Information
For the latest package outline information and land patterns, go
to www.maxim-ic.com/packages.
PACKAGE TYPE PACKAGE CODE DOCUMENT NO.
28 TDFN-EP
T2844-1
21-0139
TOP VIEW
Pin Configuration
C1N 22
C1P 23
PGND 24
OUT 25
C2P 26
C2N 27
P1 28
21 20 19 18 17 16 15
MAX8645X
MAX8645Y
14 M3
13 M4
12 M5
11 M6
10 F1
9 F2
8 SETM
1 23 4 56 7
THIN QFN
(4mm x 4mm, 0.4mm LEAD PITCH)
+ DENOTES A LEAD-FREE PACKAGE.
______________________________________________________________________________________ 13