Philips Semiconductors
SC18IM700
Master I2C-bus controller with UART interface
10. Limiting values
Table 10: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). [1] [2]
Symbol Parameter
Conditions
Min
Tamb(bias)
Tstg
VI
IOH(I/O)
bias ambient temperature
storage temperature
input voltage
HIGH-level output current
per input/output pin
referenced to VSS
−55
−65
−0.5
GPIO3 to GPIO7
-
all other pins
-
IOL(I/O)
LOW-level output current
-
per input/output pin
II/O(tot)(max) maximum total I/O current
-
Ptot/pack total power dissipation per package
[3] -
Max Unit
+125 °C
+150 °C
+5.5 V
20 mA
8
mA
20 mA
120 mA
1.5 W
[1] This product includes circuitry specifically designed for the protection of its internal devices from the
damaging effects of excessive static charge. Nonetheless, it is suggested that conventional precautions be
taken to avoid applying greater than the rated maximum.
[2] Parameters are valid over operating temperature range unless otherwise specified. All voltages are with
respect to VSS unless otherwise noted.
[3] Based on package heat transfer, not device power consumption.
SC18IM700_1
Product data sheet
Rev. 01 — 28 February 2006
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
13 of 21