240D3 查看數據表（PDF） - Unspecified

零件编号

产品描述 (功能)

比赛名单

240D3

MP Model, 60 VDC, 3 Amp, DC Control Solid State Relay (SSR)

Unspecified 

DATA SHEET

Form 0859-180904

PAGE 2

Every Opto 22 solid-state relay is subjected to full load test and six

times the rated current surge both before and after encapsulation.

This double testing of every part before it leaves the factory means

you can rely on Opto 22 solid-state relays. All Opto 22 SSRs are

guaranteed for life.

Accessories for the Power-Series SSRs include a safety cover, a

heatsink, and a matching thermal conductive pad. See page 3.

MP Series

The MP Series packaging is designed with a minimum footprint to

allow maximum relay density on the printed circuit board.

P Series

The P Series power relays provide low-profile [0.5 in. (12.7 mm)]

center mounting on printed circuit boards.

Power Series SSRs

Opto 22 provides a full range of Power

Series relays with a wide variety of voltage

(120–575 volts) and current options (3–45

amps). All Power Series relays feature 4,000

volts of optical isolation and have a high

PRV rating. Some Power Series relays

include built-in LEDs to indicate operation.

See page 4.

DC Series

The DC Series delivers isolated DC control to large OEM customers

worldwide. All DC control SSRs are LS TTL compatible.

AC Series

The AC Series offers the ultimate in solid state reliability. All AC Power

Series relays feature a built-in snubber as well as zero-voltage turn-on

and zero-current turn-off. Transient-proof models offer self protection

for noisy electrical environments.

Z Series SSRs

The Z Series employs a unique heat transfer

system that makes it possible for Opto 22

to deliver a low-cost, 10-amp, solid-state

relay in an all-plastic case. The push-on,

tool-free quick-connect terminals make the

Z Series ideal for high-volume OEM

applications. Operating temperature:

–40 °C to 100 °C. See page 7.

Printed Circuit Series SSRs

Opto 22’s Printed Circuit Series allows

OEMs to easily deploy solid-state relays on

printed circuit boards. Two unique

packages are available, both of which will

switch loads up to four amps. Operating

temperature: –40 °C to 100 °C. See page 9.

HS Series SSRs

The HS Series features an integrated heatsink,

which makes them so cool. These relays have

less thermal resistance inside, so heat

dissipates more easily than in a standard SSR

mounted to the same heatsink. With the

heatsink built-in, you don't have to select

one from a catalog, and installation is much

easier. Includes a DIN-rail adapter. See

page 13.

SPECIFICATIONS

(ALL POWER SERIES MODELS)

• 4,000 V optical isolation, input to output

• Zero voltage turn-on

• Zero-current turn-off

• Turn-on time: 0.5 cycle maximum

• Turn-off time: 0.5 cycle maximum

• Operating temperature: –40 °C to 100 °C

• Operating frequency: 25 to 65 Hz

(operates at 400 Hz with six times off-state leakage)

• Coupling capacitance, input to output: 8 pF maximum

• Hermetically sealed

• DV/DT Off-state: 200 volts per microsecond

• DV/DT commutating: snubbed for rated current at 0.5 power

factor

• UL recognized

• CSA certified

• CE component

• Torque specs for screws (this spec is both the recommended

torque and the maximum torque you should use):

Control terminals, 10 in-lb (1.13 N-m)

Field terminals, 18 in-lb (2.03 N-m)

OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com

© 2006–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Share Link: