AD8152JBP 查看數據表（PDF） - Analog Devices

零件编号

产品描述 (功能)

比赛名单

AD8152JBP

Xstream™ 34 x 34, 3.2 Gbps Asynchronous Digital Crosspoint Switch

Analog Devices 

AD8152

ABSOLUTE MAXIMUM RATINGS1

VCC to VEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7 V

VTTI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + 0.6 V

VTTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + 0.6 V

Internal Power Dissipation2

AD8152 256-Ball SBGA (BP) . . . . . . . . . . . . . . . . . . 8.33 W

Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + 0.6 V

Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . 1.7 V

Logic Input Voltage . . . . . . VEE – 0.3 V < VIN < VCC + 0.6 V

Storage Temperature Range . . . . . . . . . . . . . –65°C to +125°C

Lead Temperature Range . . . . . . . . . . . . . . . . . . . . . . . 300°C

NOTES

1 Stresses above those listed under Absolute Maximum Ratings may cause perma-

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those indicated in the operational

sections of this specification is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability.

2 Specification is for the device in free air (TA = 25°C): ␪JA = 15°C/W @ still air.

MAXIMUM POWER DISSIPATION

The maximum power that can be safely dissipated by the AD8152 is

limited by the associated rise in junction temperature. The maxi-

mum safe junction temperature for plastic encapsulated devices

is determined by the glass transition temperature of the plastic,

approximately 150°C. Temporarily exceeding this limit may cause

16

Tj = 150؇C

14

12

400 lfpm

10

200 lfpm

8

STILL AIR

6

4

2

0

0 10 20 30 40 50 60 70 80 90

AMBIENT TEMPERATURE – ؇C

Figure 2. Maximum Power Dissipation vs. Temperature

a shift in parametric performance due to a change in the stresses

exerted on the die by the package. Exceeding a junction tem-

perature of 175°C for an extended period can result in device

failure. To ensure proper operation, it is necessary to observe the

maximum power derating curves shown in Figure 2.

ORDERING GUIDE

Model

Temperature Range

AD8152JBP 0°C to 85°C

AD8152-EVAL

Package Description

256-Ball SBGA (27 mm × 27 mm)

Evaluation Board

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection. Although the

AD8152 features proprietary ESD protection circuitry, permanent damage may occur on devices

subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended

to avoid performance degradation or loss of functionality.

REV. A

–3–

Share Link: