NAS1832-3-4 查看數據表（PDF） - Unspecified

零件编号

产品描述 (功能)

比赛名单

NAS1832-3-4

Potted in Inserts are the standard for fastening in composite or honeycomb panels

Unspecified 

Genuine Aircraft Hardware Co.

All original Text, Tables, and

Drawings are Copyright 1994-2010

reproduction by permission only.

NAS1832 thru NAS1836, Inserts

For Composite or Honeycomb Panel Fastening

These NAS1832 thru NAS1836, Potted in Inserts are the standard for fastening in

composite or honeycomb panels. The panel is first prepared by drilling or routing a hole

or holes in the panel as necessary, depending on whether or not the insert is a through

hole insert or a closed end insert. After preparing the hole and securing the insert in

place with the NAS1837 adhesive tab (comes with inserts), then the adhesive or epoxy

as recommended by the panel or aircraft manufacturer is forced in through one of the

potting holes until it is forced out of the other hole or slot which acts as a vent hole. After

the proper curing time and procedures are followed, remove the tab, clean up as

required and then fasten items to the newly installed insert as appropriate.

Please use Part Number Diagram, Tables and pictures, to select inserts

When selecting length on all except NAS1833 and NAS1834, allow .040”min between insert and back skin

Continued..........

174 Documents in this book for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy.

Share Link: