ACT4065SH 查看數據表（PDF） - Active-Semi, Inc
零件编号
产品描述 (功能)
比赛名单
ACT4065SH Datasheet PDF : 9 Pages
| |||
ACT4065
ORDERING INFORMATION
PART NUMBER
ACT4065SH
ACT4065SH-T
TEMPERATURE RANGE
-40°C to 85°C
-40°C to 85°C
PIN CONFIGURATION
PACKAGE PINS
SOP-8
8
SOP-8
8
PACKING
TUBE
TAPE & REEL
BS 1
IN 2
SW 3
G4
ACT4065SH
SOP-8
8 N/C
7 EN
6 COMP
5 FB
PIN DESCRIPTION
PIN NUMBER PIN NAME
1
BS
2
IN
3
SW
4
G
5
FB
6
COMP
7
EN
8
N/C
PIN DESCRIPTION
Bootstrap. This pin acts as the positive rail for the high-side switch’s gate driver.
Connect a 10nF between this pin and SW.
Input Supply. Bypass this pin to G with a low ESR capacitor. See Input Capacitor in
Application Information section.
Switch Output. Connect this pin to the switching end of the inductor.
Ground.
Feedback Input. The voltage at this pin is regulated to 1.293V. Connect to the resistor
divider between output and ground to set output voltage.
Compensation Pin. See Compensation Technique in Application Information section.
Enable Input. When higher than 1.3V, this pin turns the IC on. When lower than 0.7V,
this pin turns the IC off. Output voltage is discharged when the IC is off. This pin has a
small internal pull up current to a high level voltage when pin is not connected. Do not
allow EN pin to exceed 6V.
Not Connected.
Active-Semi, Inc.
-2-
www.active-semi.com
Share Link: 