AD8151(Rev0) 查看數據表（PDF） - Analog Devices
零件编号
产品描述 (功能)
比赛名单
AD8151 Datasheet PDF : 36 Pages
| |||
AD8151
ABSOLUTE MAXIMUM RATINGS1
Supply Voltage
VDD – VEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.5 V
VCC – VEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
VDD – VSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
VSS – VEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
VSS – VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
VDD – VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
Internal Power Dissipation2
AD8151 184-Lead Plastic LQFP (ST) . . . . . . . . . . . . 4.2 W
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V
Storage Temperature Range . . . . . . . . . . . . –65°C to +125°C
Lead Temperature Range (Soldering 10 sec) . . . . . . . . . 300°C
NOTES
1Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2Specification is for device in free air (TA = 25°C):
184-lead plastic LQFP (ST): θJA = 30°C/W.
MAXIMUM POWER DISSIPATION
The maximum power that can be safely dissipated by the AD8151
is limited by the associated rise in junction temperature. The
maximum safe junction temperature for plastic encapsulated
devices is determined by the glass transition temperature of
the plastic, approximately 150°C. Temporarily exceeding this
limit may cause a shift in parametric performance due to a change
in the stresses exerted on the die by the package. Exceeding a
junction temperature of 175°C for an extended period can result in
device failure.
To ensure proper operation, it is necessary to observe the maxi-
mum power derating curves shown in Figure 2.
6.0
TJ = 150؇C
5.0
4.0
3.0
2.0
1.0
–10 0 10 20 30 40 50 60 70 80 90
AMBIENT TEMPERATURE – ؇C
Figure 2. Maximum Power Dissipation vs. Temperature
Model
AD8151AST
AD8151-EVAL
ORDERING GUIDE
Temperature
Range
0°C to 85°C
Package
Description
184-Lead Plastic LQFP
(20 mm × 20 mm)
Evaluation Board
Package
Option
ST-184
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the AD8151 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. 0
–3–
Share Link: 