AN5095K 查看數據表（PDF） - Panasonic Corporation
零件编号
产品描述 (功能)
比赛名单
AN5095K Datasheet PDF : 36 Pages
| |||
ICs for TV
AN5095K
s Recommended Operating Range (continued)
Parameter
Symbol
Range
Unit
Circuit current
I56
−6.4 to +0.1
mA
I58
− 0.8 to +0.1
I59
− 0.3 to +0.1
Note) Do not apply external currents or voltages to any pins not specifically mentioned.
For circuit currents, '+' denotes current flowing into the IC, and '−' denotes current flowing out of the IC.
s Electrical Characteristics at Ta = 25°C
Parameter
Symbol
Conditions
Min Typ Max Unit
Power Supply
Supply current 1
I14 Current at V14 = 9 V
39 48 57 mA
Supply current 2
I23 Current at V23 = 5 V
7 10 13 mA
Supply current 3
I47 Current at V47 = 5 V
49 63 77 mA
Stabilized supply voltage
V51 Voltage at I51 = 15 mA
5.8 6.5 7.2 V
Stabilized supply current
I51 Current at V51 = 5 V
2
5
7 mA
Stabilized supply input resistance R51 DC measurement, slant between at 1
5 10
Ω
I51 = 10 mA and 25 mA
VIF circuit Typical input; fP = 38.9 MHz, VIN = 90 dBµ, DAC data are typical
Video detection output (typ.)
VPO Modulation m = 87.5%, data 0B = 44 1.7 2.1 2.5 V[p-p]
Video detection output (max.) VPOmax 0B = 74
1.9 2.6 3.3 V[p-p]
Video detection output (min.) VPOmin 0B = 04
1.1 1.6 2.1 V[p-p]
Video detection output-
frequency characteristic
fPC Frequency which becomes −3 dB for 5.5 8 12 MHz
1 MHz output
Synchronous peak value voltage VSP Synchronized peak value voltage at
V[p-0] measurement
1.6 2.0 2.4 V
APC high-level pull-in range
fPPH High-pass side pull-in range
(difference from fP = 38.9 MHz)
1.0 2.0
APC low-level pull-in range
fPPL Low-pass side pull-in range
(difference from fP = 38.9 MHz)
−2.0 −1.0
RF AGC delay point adjustable ∆VRFDP Delay point in which data are 0A = 00 75 95
range *1
to 3F (input at V27 = approx. 6.5 V)
VCO free-running frequency
∆fP Dispersion without VIN
−1.2 0 1.2
V37 (IF AGC) = 0 V (measurement of
the difference from 38.9 MHz)
MHz
MHz
dBµ
MHz
RF AGC maximum sink current IRFmax Max. current IC can sink when pin 27 1.5 3.0 mA
is low
RF AGC minimum sink current IRFmin IC leak current at which pin 27 is high − 50 0 50 µA
Note) *1 to *9: Refer to "Explanation of test methods".
5
Share Link: 