AN5195K-C
ICs for TV
s Electrical Characteristics at Ta = 25°C (continued)
• Design reference data (continued)
Note) The characteristics listed below are theoretical values based on the IC design and are not guaranteed.
Parameter
Symbol
Conditions
Min Typ Max Unit
VIF circuit (continued) Typical input: fP = 38.9 MHz, VIN = 90 dBµ
AFT offset adjustment sensitivity SAFT
Average amount of change of
output voltage V30 at data 1 step
Video detection output
fluctuation with VCC
∆VP/V VCC = ±10%
Video detection output-
temperature characteristics
∆VP/T Ta = −20°C to +70°C
0.1 0.3 V/
Step
±15 %
±10 %
Input resistance (pin 24, pin 25) RI24,25 f = 38.9 MHz
1.2 kΩ
Input capacitance (pin24, pin 25) CI24,25 f = 38.9 MHz
4.0 pF
Sound IF output level
VSIF fS = 38.9 MHz−6.0 MHz, P/S = 20 dB 90 110 dBµ
VCO control sensitivity
βP
∆V42 = ± 0.1 V
2.0 3.5 kHz/mV
VCO control range
fVCO Free-running frequency change width 3 5 MHz
at data 0C = 00 to 7F
RF AGC delay-point temperature ∆VDP/T Ta = −20°C to +70°C
characteristics
5
dB
VCO free-running frequency
temperature characteristics
∆fP/T Ta = −20°C to +70°C
300 kHz
AFT center frequency
temperature characteristics
∆fAFT/T Ta = −20°C to +70°C, input frequency 300 kHz
at which AFT output voltage becomes 4.5 V
External mode output DC
voltage
V41EXT Output DC voltage at AV SW
external mode
0.5 1.0 1.8 V
SIF circuit Typical input: fS = 6.0 MHz, fM = 400 Hz, VIN = 90 dBµ
Input limiting level
VLIM Input level to become VSOP = −3 dB 50 dBµ
AM rejection ratio
AMR AM = 30%
55 dB
Total harmonic distortion
THD ∆f = ±50 kHz
1.0 %
SN ratio
SNA
Audio output with VCC fluctuation ∆VS/V
Audio output temperature
characteristics
∆VS/T
∆f = ±50 kHz, fM = 400 Hz, on/off
VCC = ±10%
Ta = −20°C to +70°C
55 dB
±10 %
±10 %
SIF input resistance
SIF input resistance
AV SW circuit
RI35 DC measurement
RI36 DC measurement
30 kΩ
30 kΩ
Video SW
CTVII f = 1 MHz, VIN = 1 V[p-p]
cross-talk (Internal → Internal )
Internal → Internal
−55 dB
Video SW
CTVEI f = 1 MHz, VIN = 1 V[p-p]
−55 dB
cross-talk (External → Internal)
Internal → External, External → Internal
Audio SW
CTAII fS = 6.5 MHz, fM = 400 Hz, VIN = 1 V[p-p] −60 dB
cross-talk (Internal → Internal)
fS = 6.5 MHz, fM = 1.0 kHz, VIN = 1 V[p-p]
10