AT27C2048-55JI_07 查看數據表（PDF） - Atmel Corporation

零件编号

产品描述 (功能)

比赛名单

AT27C2048-55JI_07

2-Megabit (128K x 16) OTP EPROM

Atmel Corporation 

AT27C2048

18. Rapid Programming Algorithm

A 50 µs CE pulse width is used to program. The address is set to the first location. VCC is raised

to 6.5V and VPP is raised to 13.0V. Each address is first programmed with one 50 µs CE pulse

without verification. Then a verification/reprogramming loop is executed for each address. In the

event a word fails to pass verification, up to 10 successive 50 µs pulses are applied with a verifi-

cation after each pulse. If the word fails to verify after 10 pulses have been applied, the part is

considered failed. After the word verifies properly, the next address is selected until all have

been checked. VPP is then lowered to 5.0V and VCC to 5.0V. All words are read again and com-

pared with the original data to determine if the device passes or fails.

9

0632F–EPROM–12/07

Share Link: