BA6811 查看數據表（PDF） - ROHM Semiconductor

零件编号

产品描述 (功能)

比赛名单

BA6811

Fan motor driver IC

ROHM Semiconductor 

Motor driver ICs

(3)Hall amplifier input voltage

BA6811F / BA6813F

Hall current is given by :

VCC

R1)R2)RH

where RH is the Hall device impedance.

The R1 and R2 resistances must be set so as to maintain

the Hall amplifier input bias voltage within the range of 0V

to (VCC*2.8V) including the signal amplitude.

The Hall device may be affected by power supply noise

due to the PCB conductor pattern. If you have this prob-

lem, insert a capacitor C1 as shown in Fig. 5.

If the conductor lines from the Hall device output termi-

nals to the Hall inputs of the IC are particularly long, noise

can be picked up and fed into the inputs. If you have this

problem, insert a capacitor C2 as shown in Fig. 5. Note

that the Hall inputs have no hysteresis in this IC.

FExternal dimensions (Units: mm)

717

Share Link: