CMX641A 查看數據表（PDF） - CML Microsystems Plc
零件编号
产品描述 (功能)
比赛名单
CMX641A Datasheet PDF : 26 Pages
| |||
Dual SPM/Security Detector/Generator
1.3 External Components
CMX641A
Figure 2 Recommended External Components
Fixed Bandwidth Operating State, Controlled Sensitivity Mode and
Enhanced Features Operating State
R1 68kΩ
±1%
R2 68kΩ
±1%
R3 750kΩ
±1%
R4 750kΩ
±1%
R5 68kΩ
±1%
R6 68kΩ
±1%
R7 750kΩ
±1%
R8 750kΩ
±1%
C1 1.0µF
C2 1.0µF
C3 270pF
C4 270pF
C5 270pF
C6 270pF
X1 3.579545MHz
±20%
±20%
±5%
±5%
±5%
±5%
Fixed Bandwidth Operating State, Fixed Sensitivity Mode
In this mode input amplifier components are chosen to set the required sensitivity of the CMX641A. (See
section 1.6.5).
Note that when calculating/selecting gain components, R3, R4, R7 and R8 should always be greater than
or equal to 100kΩ.
Particular attention should be paid to decoupling VDD and keeping the power, ground and signal lines free
from unnecessary noise.
Telephone systems may have unusually high dc and ac voltages present on the line, as either differential
or common mode signals. If the CMX641A is part of a host system which does not have its own input
protection, then protection diodes must be added to both signal inputs (+ and -) so that the voltage on any
pin is limited to within VSS – 0.3V and Vdd + 0.3V. The breakdown voltage of capacitors and the peak
inverse voltage of diodes must be sufficient to withstand the sum of the dc and peak-peak ac voltages
applied.
© 2002 Consumer Microcircuits Limited
8
D/641A/5
Share Link: 