FU-48SDF-Y37M96F 查看數據表（PDF） - Mitsumi
零件编号
产品描述 (功能)
比赛名单
FU-48SDF-Y37M96F Datasheet PDF : 5 Pages
| |||
JAN06 (1/5)
MITSUBISHI (OPTICAL DEVICES)
FU-48SDF-x37M9yF
1.3 μm DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
DESCRIPTION
Module type FU-48SDF-x37M9yF is a cooled butterfly
packaged 1.3μm DFB-LD module with single-mode
optical fiber.
This module is suitable for a light source of analog
applications such repeater systems.
FEATURES
• High liniality multi quantum wells (MQW) DFB-LD
• Emission wavelength is in 1.3μm band
• Built-in optical isolator
• Thermo electric cooler for laser temperature control
• With photodiode for optical output monitor
• RoHS (2002/95/EC) compliant
APPLICATION
Repeater systems
Radio on fiber
Analog transmission systems
ABSOLUTE MAXIMUM RATINGS (Tld=25°C)
Parameter
Symbol
Conditions
Rating
Unit
Laser diode Optical output power from fiber end
Pf
CW -37M92
10
mW
-37M96
20
-37M98
Forward current
If
CW
150
mA
Reverse voltage
Vrl
-
2
V
Photodiode
Reverse voltage
Vrd
-
20
V
Forward current
Ifd
-
2
mA
Cooler
Voltage
Vpem
-
2.4
V
(Note)
Current
Ipem
-
1.2
A
Operating case temperature
Tc
-
-20 to 65
°C
Storage temperature
Tstg
-
-40 to 70
°C
Note. Even if the thermo-electric cooler (TEC) is operated within the rated conditions, uncontrolled current loading or
operation without heat sink may easily damage the module by exceeding the storage temperature range. Thermistor
resistance should be properly monitored by the feedback circuit during TEC operation to avoid the catastrophic
damage.
Mitsubishi Electric Corporation reserves the right to make changes to the products or information contained herein
without notice. No liability is assumed as a result of their use or application.
MITSUBISHI CONFIDENTIAL
Share Link: 