IS41C16100(2001) 查看數據表（PDF） - Integrated Silicon Solution

零件编号

产品描述 (功能)

比赛名单

IS41C16100
(Rev.:2001)

1M x 16 (16-MBIT) DYNAMIC RAM WITH EDO PAGE MODE

Integrated Silicon Solution 

IS41C16100

IS41LV16100

ISSI ®

ELECTRICAL CHARACTERISTICS(1)

(Recommended Operating Conditions unless otherwise noted.)

Symbol Parameter

Test Condition

Speed Min. Max. Unit

IIL

Input Leakage Current

Any input 0V ≤ VIN ≤ Vcc

Other inputs not under test = 0V

–5

5

µA

IIO

Output Leakage Current

Output is disabled (Hi-Z)

0V ≤ VOUT ≤ Vcc

–5

5

µA

VOH

Output High Voltage Level

IOH = –5.0 mA (5V)

IOH = –2.0 mA (3.3V)

2.4 —

V

VOL

Output Low Voltage Level

ICC1

Standby Current: TTL

IOL = 4.2 mA (5V)

—

IOL = 2.0 mA (3.3V)

RAS, LCAS, UCAS ≥ VIH Commerical 5V

—

3.3V —

Extended/Industrial 5V —

3.3V —

0.4

V

3

mA

3

4

mA

4

ICC2

Standby Current: CMOS

RAS, LCAS, UCAS ≥ VCC – 0.2V

5V —

3.3V —

2

mA

2

ICC3

Operating Current:

RAS, LCAS, UCAS,

Random Read/Write(2,3,4)

Address Cycling, tRC = tRC (min.)

Average Power Supply Current

-50 — 160 mA

-60 — 145

ICC4

Operating Current:

RAS = VIL, LCAS, UCAS,

EDO Page Mode(2,3,4)

Cycling tPC = tPC (min.)

Average Power Supply Current

-50 —

-60 —

90 mA

80

ICC5

Refresh Current:

RAS Cycling, LCAS, UCAS ≥ VIH

RAS-Only(2,3)

tRC = tRC (min.)

Average Power Supply Current

-50 — 160 mA

-60 — 145

ICC6

Refresh Current:

RAS, LCAS, UCAS Cycling

CBR(2,3,5)

tRC = tRC (min.)

Average Power Supply Current

-50 — 160 mA

-60 — 145

Notes:

1. An initial pause of 200 µs is required after power-up followed by eight RAS refresh cycles (RAS-Only or CBR) before proper device

operation is assured. The eight RAS cycles wake-up should be repeated any time the tREF refresh requirement is exceeded.

2. Dependent on cycle rates.

3. Specified values are obtained with minimum cycle time and the output open.

4. Column-address is changed once each EDO page cycle.

5. Enables on-chip refresh and address counters.

6

Integrated Silicon Solution, Inc. — 1-800-379-4774

Rev. G

08/29/01

Share Link: