ISL8499(2005) 查看數據表（PDF） - Intersil
零件编号
产品描述 (功能)
比赛名单
ISL8499
(Rev.:2005)
(Rev.:2005)
Intersil
ISL8499 Datasheet PDF : 13 Pages
| |||
ISL8499
Electrical Specifications - 4.3V Supply
Test Conditions: V+ = +3.9V to +4.5V, GND = 0V, VINH = 1.6V, VINL = 0.5V (Notes 4, 6),
Unless Otherwise Specified (Continued)
PARAMETER
TEST CONDITIONS
TEMP (NOTE 5)
(NOTE 5)
(°C)
MIN
TYP
MAX UNITS
Total Harmonic Distortion
f = 20Hz to 20kHz, VCOM = 2VP-P, RL = 600Ω
25
NO or NC OFF Capacitance, COFF f = 1MHz, VNO or VNC = VCOM = 0V, (See Figure 7)
25
COM ON Capacitance, CCOM(ON) f = 1MHz, VNO or VNC = VCOM = 0V, (See Figure 7)
25
POWER SUPPLY CHARACTERISTICS
-
0.003
-
%
-
106
-
pF
-
212
-
pF
Power Supply Range
Full
1.65
-
4.5
V
Positive Supply Current, I+
V+ = +4.5V, VIN = 0V or V+
25
-
Full
-
-
0.06
µA
-
1.4
µA
Positive Supply Current, I+
V+ = +4.2V, VIN = 2.85V
DIGITAL INPUT CHARACTERISTICS
25
-
-
10
µA
Input Voltage Low, VINL
Full
-
-
0.5
V
Input Voltage High, VINH
Full
1.6
-
-
V
Input Current, IINH, IINL
V+ = 4.5V, VIN = 0V or V+, (Note 8)
Full
-0.5
-
0.5
µA
NOTES:
5. VIN = input voltage to perform proper function.
6. The algebraic convention, whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
7. Parts are 100% tested at +25°C. Limits across the full temperature range are guaranteed by design and correlation.
8. Flatness is defined as the difference between maximum and minimum value of on-resistance over the specified analog signal range.
9. Guaranteed but not tested.
10. RON matching between channels is calculated by subtracting the channel with the highest max Ron value from the channel with lowest max
RON value, between NC1 and NC2, NC3 and NC4 or between NO1 and NO2, NO3 and NO4.
Electrical Specifications - 3V Supply
Test Conditions: V+ = +2.7V to +3.3V, GND = 0V, VINH = 1.4V, VINL = 0.5V (Notes 4, 6),
Unless Otherwise Specified
PARAMETER
TEST CONDITIONS
TEMP (NOTE 5)
(NOTE 5)
(°C)
MIN
TYP
MAX UNITS
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, VANALOG
Full
0
ON Resistance, RON
V+ = 2.7V, ICOM = 100mA, VNO or VNC = 0V to V+,
25
-
(See Figure 5)
Full
-
-
V+
V
0.3
0.45
Ω
-
0.6
Ω
RON Matching Between Channels, V+ = 2.7V, ICOM = 100mA, VNO or VNC = Voltage at
25
-
0.04
0.08
Ω
∆RON
max RON, (Note 9)
Full
-
-
0.09
Ω
RON Flatness, RFLAT(ON)
V+ = 2.7V, ICOM = 100mA, VNO or VNC = 0V to V+,
25
-
0.06
0.15
Ω
(Note 7)
Full
-
-
0.15
Ω
NO or NC OFF Leakage Current, V+ = 3.3V, VCOM = 0.3V, 3V, VNO or VNC = 3V, 0.3V
25
-
1.2
-
nA
INO(OFF) or INC(OFF)
Full
-
13
-
nA
COM ON Leakage Current,
V+ = 3.3V, VCOM = 0.3V, 3V, or VNO or VNC = 0.3V,
25
-
1
-
nA
ICOM(ON)
3V, or Floating
Full
-
35
-
nA
DYNAMIC CHARACTERISTICS
Turn-ON Time, tON
V+ = 2.7V, VNO or VNC = 1.5V, RL = 50Ω, CL = 35pF, 25
-
(See Figure 1, Note 8)
Full
-
21
30
ns
-
35
ns
Turn-OFF Time, tOFF
V+ = 2.7V, VNO or VNC = 1.5V, RL = 50Ω, CL = 35pF, 25
-
(See Figure 1, Note 8)
Full
-
17
27
ns
-
32
ns
4
FN6111.0
January 27, 2005
Share Link: