datasheetbank_Logo
数据手册搜索引擎和 Datasheet免费下载 PDF

LA3410 查看數據表(PDF) - SANYO -> Panasonic

零件编号
产品描述 (功能)
比赛名单
LA3410 Datasheet PDF : 13 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
LA3410
(4) When C9 is decreased, the capture range will
widen but the stereo main distortion at f=10kHz
will worsen (beat distortion). This data is shown
in Fig. 4-E. Set C2 so that the stereo distortion
is kept rather low.
(5) The data on pilot level vs. capture range is
shown in Fig. 4-F to G. It is necessary to set the
loop filter constants, with the input pilot level
considered, so that the capture range becomes
wide. For example, when the LA1260 is used
for IF IC, the minimum demodulation output
will be 183mV (100% mod) and the stereo op-
eration must be performed at pilot level 12mV
with a pilot margin allowed. In this case,
C2=0.1µF, R1=6.8 to 10kare recommended.
5. Improvement in sub, stereo (R) distortions worsened at low frequencies.
There are some cases where the sub, stereo (R) distortions are worsened
at low frequencies. One cause for this worsening is the phase shift be-
tween 38kHz and 19kHz in the flip-flop inside the IC. This shift is im-
proved by connecting a phase compensating capacitor across pin 3 and
GND as shown in Fig. 5. The CD value differs with each IF (the phase
shift between the sub signal and pilot signal in the composite signal
differs with each IF). An adequate value is 200 to 1500pF.
No.1407–7/13

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]