LC863516C 查看數據表（PDF） - SANYO -> Panasonic

零件编号

产品描述 (功能)

比赛名单

LC863516C

8-Bit Single-Chip Microcontroller

SANYO -> Panasonic 

Ordering number : ENA0118A

LC863548C, LC863540C

LC863532C, LC863528C

LC863524C, LC863520C

LC863516C

CMOS IC

48K/40K/32K/28K/24K/20K/16K-byte ROM,

CGROM16K-byte

on-chip 640/512-byte RAM and 176×9-bit OSD RAM

8-bit 1-chip Microcontroller

Overview

The LC863548C/40C/32C/28C/24C/20C/16C are 8-bit single chip microcontrollers with the following on-chip functional

blocks :

• CPU : Operable at a minimum bus cycle time of 0.424µs

• On-chip ROM capacity

Program ROM : 48K/40K/32K/28K/24K/20K/16K-bytes

CGROM

: 16K-bytes

• On-chip RAM capacity : 640/512-bytes

• OSD RAM : 176 × 9-bits

• On-screen display controller

• Four channels × 6-bit AD Converter

• Three channels × 7-bit PWM

• Two channels × 16-bit timer/counter, 14-bit base timer

• IIC-bus compliant serial interface circuit (Multi-master type)

• ROM correction function

• 13-source 8-vectored interrupt system

• Integrated system clock generator and display clock generator

Only one X’tal oscillator (32.768kHz) for PLL reference is used for both generators.

All of the above functions are fabricated on a single chip.

Note : This product includes the IIC bus interface circuit. If you intend to use the IIC bus interface, please notify us of this in

advance of our receiving your program ROM code order.

Purchase of SANYO IIC components conveys a license under the Philips IIC Patents Rights to use these components in

an IIC system, provided that the system conforms to the IIC Standard Specification as defined by Philips.

Trademarks

IIC is a trademark of Philips Corporation.

Any and all SANYO Semiconductor products described or contained herein do not have specifications

that can handle applications that require extremely high levels of reliability, such as life-support systems,

aircraft's control systems, or other applications whose failure can be reasonably expected to result in

serious physical and/or material damage. Consult with your SANYO Semiconductor representative

nearest you before usingany SANYO Semiconductor products described or contained herein in such

applications.

SANYO Semiconductor assumes no responsibility for equipment failures that result from using products

at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition

ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor

products described or contained herein.

Ver.1.00

83006 / 52506HKIM No.A0118-1/17

Share Link: