LQFP100 查看數據表（PDF） - NXP Semiconductors.
零件编号
产品描述 (功能)
比赛名单
LQFP100 Datasheet PDF : 69 Pages
| |||
NXP Semiconductors
LPC2364/65/66/67/68
Single-chip 16-bit/32-bit microcontrollers
6.2 Pin description
Table 4. Pin description
Symbol
Pin
Ball
P0[0] to P0[31]
P0[0]/RD1/TXD3/ 46[1]
SDA1
K8[1]
P0[1]/TD1/RXD3/ 47[1]
SCL1
J8[1]
P0[2]/TXD0
98[1]
C4[1]
P0[3]/RXD0
99[1]
A2[1]
P0[4]/
I2SRX_CLK/
RD2/CAP2[0]
81[1]
A8[1]
P0[5]/
I2SRX_WS/
TD2/CAP2[1]
80[1]
D7[1]
P0[6]/
79[1]
I2SRX_SDA/
SSEL1/MAT2[0]
B8[1]
P0[7]/
78[1]
I2STX_CLK/
SCK1/MAT2[1]
A9[1]
P0[8]/
77[1]
I2STX_WS/
MISO1/MAT2[2]
C8[1]
Type
I/O
I/O
I
O
I/O
I/O
O
I
I/O
I/O
O
I/O
I
I/O
I/O
I
I
I/O
I/O
O
I
I/O
I/O
I/O
O
I/O
I/O
I/O
O
I/O
I/O
I/O
O
Description
Port 0: Port 0 is a 32-bit I/O port with individual direction controls for each
bit. The operation of Port 0 pins depends upon the pin function selected via
the pin connect block. Pins 12, 13, 14, and 31 of this port are not available.
P0[0] — General purpose digital input/output pin.
RD1 — CAN1 receiver input. (LPC2364/66/68 only)
TXD3 — Transmitter output for UART3.
SDA1 — I2C1 data input/output (this is not an open-drain pin).
P0[1] — General purpose digital input/output pin.
TD1 — CAN1 transmitter output. (LPC2364/66/68 only)
RXD3 — Receiver input for UART3.
SCL1 — I2C1 clock input/output (this is not an open-drain pin).
P0[2] — General purpose digital input/output pin.
TXD0 — Transmitter output for UART0.
P0[3] — General purpose digital input/output pin.
RXD0 — Receiver input for UART0.
P0[4] — General purpose digital input/output pin.
I2SRX_CLK — Receive Clock. It is driven by the master and received by
the slave. Corresponds to the signal SCK in the I2S-bus specification.
RD2 — CAN2 receiver input. (LPC2364/66/68 only)
CAP2[0] — Capture input for Timer 2, channel 0.
P0[5] — General purpose digital input/output pin.
I2SRX_WS — Receive Word Select. It is driven by the master and received
by the slave. Corresponds to the signal WS in the I2S-bus specification.
TD2 — CAN2 transmitter output. (LPC2364/66/68 only)
CAP2[1] — Capture input for Timer 2, channel 1.
P0[6] — General purpose digital input/output pin.
I2SRX_SDA — Receive data. It is driven by the transmitter and read by the
receiver. Corresponds to the signal SD in the I2S-bus specification.
SSEL1 — Slave Select for SSP1.
MAT2[0] — Match output for Timer 2, channel 0.
P0[7] — General purpose digital input/output pin.
I2STX_CLK — Transmit Clock. It is driven by the master and received by
the slave. Corresponds to the signal SCK in the I2S-bus specification.
SCK1 — Serial Clock for SSP1.
MAT2[1] — Match output for Timer 2, channel 1.
P0[8] — General purpose digital input/output pin.
I2STX_WS — Transmit Word Select. It is driven by the master and
received by the slave. Corresponds to the signal WS in the I2S-bus
specification.
MISO1 — Master In Slave Out for SSP1.
MAT2[2] — Match output for Timer 2, channel 2.
LPC2364_65_66_67_68
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 7.1 — 16 October 2013
© NXP B.V. 2013. All rights reserved.
10 of 69
Share Link: 