LQFP144 查看數據表（PDF） - NXP Semiconductors.
零件编号
产品描述 (功能)
比赛名单
LQFP144 Datasheet PDF : 149 Pages
| |||
NXP Semiconductors
LPC1850/30/20/10
32-bit ARM Cortex-M3 microcontroller
Table 3. Pin description
LCD, Ethernet, USB0, and USB1 functions are not available on all parts. See Table 2.
Symbol
Description
Multiplexed digital pins
P0_0
L3 K3 G2 47 32 [2] N; PU I/O GPIO0[0] — General purpose digital input/output pin.
I/O SSP1_MISO — Master In Slave Out for SSP1.
I ENET_RXD1 — Ethernet receive data 1 (RMII/MII
interface).
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
I/O I2S0_TX_WS — Transmit Word Select. It is driven by
the master and received by the slave. Corresponds to
the signal WS in the I2S-bus specification.
I/O I2S1_TX_WS — Transmit Word Select. It is driven by
the master and received by the slave. Corresponds to
the signal WS in the I2S-bus specification.
P0_1
M2 K2 G1 50 34 [2] N; PU I/O GPIO0[1] — General purpose digital input/output pin.
I/O SSP1_MOSI — Master Out Slave in for SSP1.
I ENET_COL — Ethernet Collision detect (MII interface).
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
ENET_TX_EN — Ethernet transmit enable (RMII/MII
interface).
I/O I2S1_TX_SDA — I2S1 transmit data. It is driven by the
transmitter and read by the receiver. Corresponds to the
signal SD in the I2S-bus specification.
P1_0
P2 L1 H1 54 38 [2] N; PU I/O GPIO0[4] — General purpose digital input/output pin.
I CTIN_3 — SCT input 3. Capture input 1 of timer 1.
I/O EMC_A5 — External memory address line 5.
- R — Function reserved.
- R — Function reserved.
I/O SSP0_SSEL — Slave Select for SSP0.
- R — Function reserved.
- R — Function reserved.
LPC1850_30_20_10
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6.1 — 7 February 2013
© NXP B.V. 2013. All rights reserved.
8 of 149
Share Link: 