datasheetbank_Logo
数据手册搜索引擎和 Datasheet免费下载 PDF

M34513E4SP/FP 查看數據表(PDF) - Renesas Electronics

零件编号
产品描述 (功能)
比赛名单
M34513E4SP/FP
Renesas
Renesas Electronics Renesas
M34513E4SP/FP Datasheet PDF : 97 Pages
First Prev 21 22 23 24 25 26 27 28 29 30 Next Last
MITSUBISHI MICROCOMPUTERS
4513/4514 Group
SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
(7) Interrupt sequence
Interrupts only occur when the respective INTE flag, interrupt en-
able bits (V10V13 and V20V23), and interrupt request flag are
1.The interrupt actually occurs 2 to 3 machine cycles after the
cycle in which all three conditions are satisfied. The interrupt oc-
curs after 3 machine cycles only when the three interrupt condi-
tions are satisfied on execution of other than one-cycle instructions
(Refer to Figure 16).
When an interrupt request flag is set after its interrupt is enabled (Note 1)
f (XIN) (middle-speed mode)
f (XIN) (high-speed mode)
System clock
Interrupt enable
flag (INTE)
1 machine cycle
T1 T2 T3 T1 T2 T3 T1 T2 T3 T1 T2 T3
T1 T2 T3
EI instruction
execution cycle
Interrupt enabled state
Interrupt disabled state
External
interrupt
INT0, INT1
EXF0, EXF1
Timer 1,
Timer 2,
Timer 3,
Timer 4,
A-D, and
Serial I/O
interrupts
T1F, T2F, T3F,
T4F, ADF,SIOF
Retaining level of system
clock for 4 periods or more
is necessary.
Interrupt activated
condition is satisfied.
Flag cleared
2 to 3 machine cycles
(Notes 2, 3)
The program starts from
the interrupt address.
Notes 1: The 4513/4514 Group operates in the middle-speed mode after system is released from reset.
2: The address is stacked to the last cycle.
3: This interval of cycles depends on the executed instruction at the time when each interrupt activated condition is satisfied.
Fig. 16 Interrupt sequence
23

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]