MAX6378_R33-T 查看數據表（PDF） - Maxim Integrated
零件编号
产品描述 (功能)
比赛名单
MAX6378_R33-T Datasheet PDF : 7 Pages
| |||
3-Pin, Ultra-Low-Power SC70/SOT23
Voltage Detectors
ABSOLUTE MAXIMUM RATINGS
Terminal Voltage (with respect to GND)
VCC ...........................................................................-0.3V to +6V
OUT, OUT (push-pull) ................................-0.3V to (VCC + 0.3V)
OUT (open-drain) .....................................................-0.3V to +6V
Input Current (VCC) .............................................................20mA
Output Current (OUT, OUT) ................................................20mA
Continuous Power Dissipation (TA = +70°C)
3-Pin SC70 (derate 2.17mW/°C above +70°C) ...........174mW
3-Pin SOT23 (derate 4mW/°C above +70°C)..............320mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature ......................................................+150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = full range, TA = -40°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C and VCC = 3V.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX
VCC Operating Range
TA = 0°C to +70°C
TA = -40°C to +85°C
1.0
5.5
1.2
5.5
Supply Current
MAX6375/76/77 only, VCC = 3.0V for VTH ≤ 2.93V,
ICC
VCC = 3.2V for VTH > 2.93V, no load
VCC = 5.5V, no load
0.5
1.0
1.0
1.75
UNITS
V
µA
Voltage Threshold
VTH Table 1
TA = +25°C
TA = -40°C to +85°C
VTH - 1.5% VTH VTH + 1.5%
V
VTH - 2.5% VTH VTH + 2.5%
Voltage Threshold Tempco ∆VTH/°C
40
Propagation Delay
OUT Output Voltage
(MAX6375/MAX6377/
MAX6378/MAX6380)
VCC = (VTH + 100mV) to (VTH - 100mV)
VCC = (VTH - 100mV) to (VTH + 100mV)
ISINK = 1.6mA, VCC > 2.1V, OUT asserted
VOL
ISINK = 100µA, VCC ≥ 1.2V, OUT asserted
20
42
0.3
0.4
OUT Output Voltage
(MAX6375/MAX6377)
VOH
VOH
ISOURCE = 500µA, VCC = 3.2V, MAX6375 only
ISOURCE = 800µA, VCC = 4.5V, VTH ≤ 4.38V
ISOURCE = 800µA, VCC = VTH(MAX), VTH ≥ 4.5V
ISOURCE = 500µA, VCC ≥ 2.1V, OUT asserted
ISOURCE = 50µA, VCC ≥ 1.2V, OUT asserted
0.8 ✕ VCC
0.8 ✕ VCC
0.8 ✕ VCC
0.8 ✕ VCC
0.8 ✕ VCC
OUT Output Voltage
ISINK = 1.2mA, VCC ≥ 3.2V, OUT not asserted,
MAX6376 only
0.3
(MAX6376/MAX6379)
VOL
ISINK = 3.2mA, VCC ≥ 4.5V, OUT not asserted,
VTH ≤ 4.38V
0.4
ISINK = 3.2mA, VCC = VTH(MAX), VTH ≥ 4.5V
0.4
Voltage Threshold
MAX6375/MAX6376/MAX6377
6.3
Hysteresis
MAX6378/MAX6379/MAX6380
9.5
Open-Drain OUT Output
Leakage Current
0.1
Note 1: Production tested at +25°C only. Overtemperature limits are guaranteed by design, not production tested.
ppm/°C
µs
V
V
V
mV
µA
2 _______________________________________________________________________________________
Share Link: 