MBRS130LTR 查看數據表（PDF） - International Rectifier
零件编号
产品描述 (功能)
比赛名单
MBRS130LTR Datasheet PDF : 6 Pages
| |||
MBRS130LTR
Bulletin PD-20588 rev. E 07/04
Voltage Ratings
Part number
VR Max. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
MBRS130LTR
30
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward Current
IFSM Max. Peak One Cycle Non-Repetitive
Surge Current
EAS Non- Repetitive Avalanche Energy
IAR Repetitive Avalanche Current
Electrical Specifications
Value
1.0
230
40
3.0
1.0
Units Conditions
A 50% duty cycle @ TL = 106 °C, rectangular wave form
A 5µs Sine or 3µs Rect. pulse Following any rated
load condition and
10ms Sine or 6ms Rect. pulse with rated VRRM applied
mJ TJ = 25 °C, IAS = 1A, L = 6mH
A Current decaying linearly to zero in 1 µsec
Frequency limited by TJ max. Va = 1.5 x Vr typical
Parameters
Value Units
Conditions
VFM Max. Forward Voltage Drop
(1) 0.420
0.470
0.300
0.370
1
IRM Max. Reverse Leakage Current (1) 10
20
CT Max. Junction Capacitance
LS Typical Series Inductance
dv/dt Max. Voltage Rate of Change
200
2.0
10000
(Rated VR)
(1) Pulse Width < 300µs, Duty Cycle < 2%
Thermal-Mechanical Specifications
Parameters
Value
V @ 1A
V @ 2A
TJ = 25 °C
V @ 1A
V @ 2A
TJ = 125 °C
mA TJ = 25 °C
mA TJ = 100 °C
mA TJ = 125 °C
VR = rated VR
pF VR = 5VDC (test signal range 100KHz to 1Mhz) 25°C
nH Measured lead to lead 5mm from package body
V/µs
Units
Conditions
TJ Max. Junction Temperature Range(*) - 55 to 125 °C
Tstg Max. Storage Temperature Range - 55 to 150 °C
RthJL
Max. Thermal Resistance
Junction to Lead
(**)
25
°C/W DC operation (See Fig. 4)
RthJA Max. Thermal Resistance
Junction to Ambient
80
°C/W DC operation
wt Approximate Weight
0.10(0.003) g (oz.)
Case Style
SMB
Similar to DO-214AA
Device Marking
IR13L
(*) dPtot < 1
thermal runaway condition for a diode on its own heatsink
dTj Rth( j-a)
(**) Mounted 1 inch square PCB
2
www.irf.com
Share Link: 