MCP73811/2
1.0 ELECTRICAL
CHARACTERISTICS
Absolute Maximum Ratings†
VDDN ................................................................................7.0V
All Inputs and Outputs w.r.t. VSS ............... -0.3 to (VDD+0.3)V
Maximum Junction Temperature, TJ ............ Internally Limited
Storage temperature .....................................-65°C to +150°C
ESD protection on all pins
Human Body Model (1.5 kW in Series with 100 pF) ......≥ 4 kV
Machine Model (200pF, No Series Resistance) ..............400V
† Notice: Stresses above those listed under “Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only and functional operation of
the device at those or any other conditions above those
indicated in the operational listings of this specification
is not implied. Exposure to maximum rating conditions
for extended periods may affect device reliability.
DC CHARACTERISTICS
Electrical Specifications: Unless otherwise indicated, all limits apply for VDD= [VREG(typ.) + 0.3V] to 6V,
TA = -40°C to +85°C. Typical values are at +25°C, VDD = [VREG (typ.) + 1.0V]
Parameters
Sym
Min
Typ
Max
Units
Conditions
Supply Input
Supply Voltage
Supply Current
VDD
3.75
—
ISS
—
1000
—
50
—
1.2
Voltage Regulation (Constant Voltage Mode)
Regulated Output Voltage
VREG
—
4.20
Output Voltage Tolerance
VRTOL
-1
Line Regulation
|(ΔVBAT/VBAT)
—
/ΔVDD|
Load Regulation
|ΔVBAT/VBAT|
—
—
0.09
0.09
Supply Ripple Attenuation
PSRR
—
52
—
47
—
22
Current Regulation (Fast Charge Constant-Current Mode)
Fast Charge Current
Regulation
IREG
—
85
—
450
—
50
—
100
—
500
Charge Current Tolerance
IRTOL
-10
—
Pass Transistor ON-Resistance
ON-Resistance
RDSON
—
400
Battery Discharge Current
Output Reverse Leakage
IDISCHARGE
Current
—
0.5
6
1500
100
5
—
+1
0.30
0.30
—
—
—
—
—
—
—
—
+10
—
V
µA Charging
µA Standby (CE = VSS)
µA Shutdown
(VDD < VBAT - 100 mV)
V VDD=[VREG(Typ)+1V]
IOUT=10 mA
% TA=-5°C to +55°C
%/V VDD=[VREG(Typ)+1V] to 6V
IOUT=10 mA
% IOUT=10 mA to 50 mA
VDD=[VREG(Typ)+1V]
dB IOUT=10 mA, 10 Hz to 1 kHz
dB IOUT=10 mA, 10 Hz to 10 kHz
dB IOUT=10 mA, 10 Hz to 1 MHz
mA MCP73811 - PROG = Low
mA MCP73811 - PROG = High
mA MCP73812 - PROG = 20 kΩ
mA MCP73812 - PROG = 10 kΩ
mA MCP73812 - PROG = 2 kΩ
% TA=-5°C to +55°C
mΩ VDD = 3.75V, TJ = 105°C
2
µA Shutdown
(VDD < VBAT - 100 mV)
© 2007 Microchip Technology Inc.
DS22036A-page 3