HT6221(2000) 查看數據表（PDF） - Holtek Semiconductor

零件编号

产品描述 (功能)

比赛名单

HT6221
(Rev.:2000)

Multi-Purpose Encoders

Holtek Semiconductor 

HT6221/HT6222

When one of the keys (32 or 64 keys) is triggered

for over 36ms, the oscillator is enabled and the

chip is activated. If the key is pressed and held

for 108ms or less, the 108ms transmission codes

are enabled and comprised of a header code

(9ms), an off code (4.5ms), low byte address

codes (9ms~18ms), high byte address codes

(9ms~18ms), 8-bit data codes (9ms~18ms), and

the inverse codes of the 8-bit data codes

(18ms~9ms). After the pressed key is held for

108ms, if the key is still held down, the trans-

mission codes turn out to be a composition of

header (9ms) and off codes (2.5ms) only.

To avoid mistakes made by keyboard scanning

or simultaneous two-key inputs (except for the

three double-key active functions (K21+K22,

K21+K23, and K21+K24), the HT6221/HT6222

are facilitated with 36ms starting time.

The HT6221/HT6222 also provide three dou-

ble-key active functions (K21+K22, K21+K23,

and K21+K24) for tape deck recording opera-

tions. The double-key operation rules are

shown in timing 4 and timing 6.

Transmission codes

The transmission codes of the HT6221/6222 consist of a 9ms header code, a 4.5ms off code, 16-bit ad-

dress codes (18ms~36ms), 9ms~18ms 8-bit data codes, and the inverse code of the 8-bit data codes. The

following is an illustration of the transmission codes:

K e y - in

(K 1 ~ K 6 4 )

X2

DOUT

3 6 m s m in .

K e y E n a b le s

F osc=455kH z

4 .5 m s

0 .5 6 m s

45m s~63m s

9 m s (A 0 ~ A 1 5 + D 0 ~ D 7 + D 0 ~ D 7 ) 9 m s

108m s

38kH z,

3 3 % d u ty c a r r ie r

2 .5 m s

108m s

Output format for the DOUT

0 .5 6 m s

9m s

2 .5 m s

The output code carrier of the DOUT pin is shown in Timing 2:

38kH z

C a r r ie r

8 .7 7 m s

2 6 .3 m s

38kHz carrier

The transmission codes employ the PPM (Pulse Position Modulation) method to represent their two

logic states by "0" (1.12ms) and "1" (2.24ms) as shown in Timing 3:

"Z e ro "

0 .5 6 m s

"O n e "

3 8 k H z c a r r ie r

d a ta p e r io d ( 1 .1 2 m s )

d a ta p e r io d ( 2 .2 4 m s )

Logic states

3 8 k H z c a r r ie r

6

March 2, 2000

Share Link: