NJU3505L 查看數據表（PDF） - Japan Radio Corporation

零件编号

产品描述 (功能)

比赛名单

NJU3505L

4-BIT SINGLE CHIP MICRO CONTROLLER

Japan Radio Corporation  

NJU3505

• PORTB(PB0 − PB3)

PORTB is a 4-bit programmable input-output PORT. It is set as the output when the second bit (b1) of

the programmable input/output control register (PHY29) is set to “1”, and is set as the input when “b1” of

PHY29 is set to “0”. When the PORT is set as the output, the 4-bit signals are output through the output

terminals by writing data into the peripheral register assigned for PORTB (PHY18). PHY18 as the output

register should be written the output data before the PORTB is set as the output by PHY29, because the

conditions of the output terminals are unknown while the output data is not written in PHY18. When this

PORT is set as the input, the 4-bit external signals are gotten directly through the input terminals by

reading data from PHY18. PHY18 can be written or read independent of the state of PHY29 as the input

or output.

PORTB is set as the input in accordance with the state of PHY29 set to “0” on the “RESET” operation.

[ READING PORTB INPUT DATA (PHY18) ]

(MSB) 3

2

1

0 (LSB)

PHY18 PB3 PB2 PB1 PB0

PORTB Input Data

[ WRITING PORTB OUTPUT DATA (PHY18) ]

(MSB) 3

2

PHY18 PB3 PB2

1

0 (LSB)

PB1 PB0

PORTB Output Data

• PORTC(PC0, PC1)

PORTC is a 2-bit input-output PORT. The input or the output is selected for each bit by the mask

option. When the port is set as the output, the signal is output through the output terminal by writing data

to the PORTC register(PHY19). When the port is set as the input, the external signal is gotten directly

through the input terminal by reading data from PHY19.

[ READING PORTC INPUT DATA (PHY19) ]

(MSB) 3

2

1

0 (LSB)

PHY19

“0”

“0” PC1 PC0

PORTC Input Data

[ WRITING PORTC OUTPUT DATA (PHY19) ]

(MSB) 3

2

1

0 (LSB)

PHY19 −

−

PC1 PC0

PORTC Output Data

- 16 -

Share Link: