datasheetbank_Logo
数据手册搜索引擎和 Datasheet免费下载 PDF

NJU3505L 查看數據表(PDF) - Japan Radio Corporation

零件编号
产品描述 (功能)
比赛名单
NJU3505L
JRC
Japan Radio Corporation  JRC
NJU3505L Datasheet PDF : 64 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
NJU3505
STATUS flag(ST)
STATUS flag(ST) is the conditional flag in accordance with the result of the instruction execution. Its
condition is in accordance with follows:
1) to be same as CY flag condition.
2) to be set the condition to "0"(ST=0) when the result of the logical calculation(AND, OR, XOR, YNEA)
is zero.
3) to be set the condition to "0"(ST=0) when the result of the comparison(CMP) is zero.
However, ST flag condition is always set to "1"(ST=1) except above three.
ST flag controls the branch operation. Branch instruction does not branch when ST flag condition is "0",
and branches when ST flag condition is "1". ST flag condition is kept until the end of the next instruction
executing cycle.
The ST flag condition is unknown on the “RESET” operation.
(3) FUNCTIONAL BLOCK
ARITHMETIC LOGIC UNIT(ALU)
ARITHMETIC LOGIC UNIT(ALU) is a 4-bit binary paralleled calculation circuit operating binary addition,
binary subtraction, comparison, logical AND, logical OR, exclusive OR, and SHIFT(Rotation). And it also
can detect CARRY, BORROW or ZERO in accordance with the result of each calculation.
PROGRAM MEMORY(ROM)
PROGRAM MEMORY(ROM) consists of 4 banks, a bank consists of 32 pages, and a page consists of
64 bytes memory capacity. Therefore the NJU3505 prepares the 8192-byte ROM for the application
program. The ROM address is indicated by the Program Counter (PC).
[ PROGRAM MEMORY AREA ]
(Addresses)
00000H
Bank0
07FFH
0800H
Bank1
0FFFH
1000H
Bank2
17FFH
1800H
Bank3
Program Start Address
(Addresses in the bank)
0000H
Page0
0040H
Page1
0080H
Page2
(Addresses in the page)
00H
64Instruction Words
3FH
0780H
07C0H
07FFH
Page30
Page31
Bank0
* 8 Bits / Instruction Word
64 Instruction Words / Page
32 Pages / Bank
4 Banks / ROM
1FFFH
-8-

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]