Philips Semiconductors
I2C-bus controller
Product specification
PCF8584
11 DC CHARACTERISTICS
VDD = 5 V ±10%; Tamb = −40 to +85 °C; unless otherwise specified.
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNIT
Supply
VDD
IDD
supply voltage
supply current
4.5
5.0
5.5
V
standby; note 1
−
−
2.5
µA
operating; notes 1 and 2 −
−
1.5
mA
Inputs
CLK, IACK, A0, CS, WR, RD, RESET AND D0 to D7
VIL
LOW level input voltage note 3
VIH
HIGH level input voltage note 3
0
−
2.0
−
SDA AND SCL
VIL
LOW level input voltage note 4
0
−
VIH
HIGH level input voltage note 4
0.7VDD −
Ri
resistance to VDD
Tamb = 25 °C; note 5
25
−
Outputs
IOH
HIGH level output current VOH = 2.4 V; note 6 and 7 −2.4
−
IOL
LOW level output current VOL = 0.4 V; note 6
3.0
−
IOL
leakage current
note 8
−1
−
0.8
V
VDD
V
0.3VDD V
VDD
V
100
kΩ
−
mA
−
mA
+1
µA
Notes
1. Test conditions: 22 kΩ pull-up resistors on D0 to D7; 10 kΩ pull-up resistors on SDA, SCL, RD; RESET connected
to VSS; remaining pins open-circuit.
2. CLK waveform of 12 MHz with 50% duty factor.
3. CLK, IACK, A0, CS, WR, RD, RESET and D0 to D7 are TTL level inputs.
4. SDA and SCL are CMOS level inputs.
5. CLK, IACK, A0, CS and WR.
6. D0 to D7.
7. DTACK, STROBE.
8. D0 to D7 3-state, SDA, SCL, INT, RD, RESET.
1997 Oct 21
23