PDI1394P21BE 查看數據表（PDF） - Philips Electronics

零件编号

产品描述 (功能)

比赛名单

PDI1394P21BE

3-port physical layer interface

Philips Electronics 

Philips Semiconductors

3-port physical layer interface

Objective specification

PDI1394P21

1.0 FEATURES

• Fully supports provisions of IEEE 1394–1995 Standard for high

performance serial bus and the P1394a supplement (Version 2.0)1

• Full P1394a support includes:

– Connection debounce

– Arbitrated short reset

– Multispeed concatenation

– Arbitration acceleration

– Fly-by concatenation

– Port disable/suspend/resume

• Provides three 1394a fully-compliant cable ports at

100/200/400 Megabits per second (Mbits/s)

• Fully compliant with Open HCI requirements

• Cable ports monitor line conditions for active connection to remote

node.

• Power down features to conserve energy in battery-powered

applications include:

– Automatic device power down during suspend

– Device power down terminal

– Link interface disable via LPS

– Inactive ports powered-down

• Logic performs system initialization and arbitration functions

• Encode and decode functions included for data-strobe bit level

encoding

• Incoming data resynchronized to local clock

• Single 3.3 volt supply operation

• Minimum VDD of 2.7 V for end-of-wire power-consuming devices

• While unpowered and connected to the bus, will not drive TPBIAS

on a connected port, even if receiving incoming bias voltage on

that port

• Supports extended bias-handshake time for enhanced

interoperability with camcorders

• Interface to link-layer controller supports low-cost bus-holder

isolation and optional Annex J electrical isolation

• Data interface to link-layer controller through 2/4/8 parallel lines at

49.152 MHz

• Low-cost 24.576 MHz crystal provides transmit, receive data at

100/200/400 Mbits/s, and link-layer controller clock at 49.152 MHz

• Does not require external filter capacitors for PLL

• Interoperable with link-layer controllers using 3.3 V and 5 V

supplies

• Interoperable with other Physical Layers (PHYs) using 3.3 V and

5 V supplies

• Node power class information signaling for system power

management

• Cable power presence monitoring

• Separate cable bias (TPBIAS) for each port

• Register bits give software control of contender bit, power class

bits, link active bit, and 1394a features

• Fully interoperable with FireWire™ implementation of IEEE Std 1394

• Function and pin compatible with the Texas Instruments 400 Mbps

Phy TSB41LV03™

2.0 DESCRIPTION

The PDI1394P21 provides the digital and analog transceiver functions

needed to implement a three port node in a cable-based IEEE

1394–1995 and/or 1394a network. Each cable port incorporates two

differential line transceivers. The transceivers include circuitry to

monitor the line conditions as needed for determining connection

status, for initialization and arbitration, and for packet reception and

transmission. The PDI1394P21 is designed to interface with a Link

Layer Controller (LLC), such as the PDI1394L11 or PDI1394L21.

3.0 ORDERING INFORMATION

PACKAGE

TEMPERATURE RANGE

80-pin plastic LQFP

0°C to +70°C

OUTSIDE NORTH AMERICA

PDI1394P21 BE

NORTH AMERICA

PDI1394P21 BE

PKG. DWG. #

SOT315-1

1. Implements technology covered by one or more patents of Apple Computer, Incorporated and SGS Thompson, Limited.

1999 Jul 09

2

Share Link: