PIP3213 查看數據表（PDF） - Philips Electronics
零件编号
产品描述 (功能)
比赛名单
PIP3213 Datasheet PDF : 8 Pages
| |||
Philips Semiconductors
TOPFET high side switch
SMD version
Product specification
PIP3213-R
STATIC CHARACTERISTICS
Limits are at -40˚C ≤ Tmb ≤ 150˚C and typicals at Tmb = 25˚C unless otherwise stated.
SYMBOL PARAMETER
CONDITIONS
MIN.
TYP.
MAX. UNIT
Clamping voltages
VBG
Battery to ground
VBL
Battery to load
-VLG
Negative load to ground
-VLG
Negative load voltage1
IG = 1 mA
IL = IG = 1 mA
IL = 10 mA
IL = 15 A; tp = 300 µs
50 55 65
V
50 55 65
V
18 23 28
V
20 25 30
V
Supply voltage
VBG
Operating range2
battery to ground
5.5
-
35
V
Currents
IB
Quiescent current3
IL
Off-state load current4
IG
Operating current5
IL
Nominal load current6
Resistances
RON
On-state resistance
RON
On-state resistance
9 V ≤ VBG ≤ 16 V
VLG = 0 V
VBL = VBG
IL = 0 A
VBL = 0.5 V
-
-
20 µA
Tmb = 25˚C
-
0.1
2
µA
-
-
20 µA
Tmb = 25˚C
-
0.1
1
µA
-
2
4 mA
Tmb = 85˚C 18
-
-
A
VBG
IL
tp7
Tmb
9 to 35 V 15 A 300 µs 25˚C -
150˚C -
6V
15 A 300 µs 25˚C -
150˚C -
15 20 mΩ
-
37 mΩ
18 25 mΩ
-
45 mΩ
RG
Internal ground resistance
IG = 10 mA
95 150 190 Ω
1 For a high side switch, the load pin voltage goes negative with respect to ground during the turn-off of an inductive load.
2 On-state resistance is increased if the supply voltage is less than 9 V. Refer to figure 8.
3 This is the continuous current drawn from the supply when the input is low and includes leakage current to the load.
4 The measured current is in the load pin only.
5 This is the continuous current drawn from the supply with no load connected, but with the input high.
6 Defined as in ISO 10483-1. For comparison purposes only.
7 The supply and input voltage for the RON tests are continuous. The specified pulse duration tp refers only to the applied load current.
September 2001
3
Rev 1.000
Share Link: 