PST574 查看數據表（PDF） - Mitsumi

零件编号

产品描述 (功能)

比赛名单

PST574

System Reset Monolithic IC

Mitsumi 

MITSUMI

Application circuits

1. Normal hard reset

System Reset PST574

Note: Connect a capacitor between IC pins 1 and 2

if VCC line impedance is high.

2. Battery checker (LED ON for high voltage)

Note: Connect a capacitor between IC pins 1 and 2

if VCC line impedance is high.

3. Battery checker (LED ON for low voltage)

Note: Connect a capacitor between IC pins 1 and 2

if VCC line impedance is high.

4. Hysteresis voltage UP method

When increasing hysteresis voltage for stable system

operation, determine RH as follows and connect

externally.

However, ICCH is -5000PPM/°C, so perform

temperature compensation at RH when using over a

wide temperature range.

Hysteresis voltage UP amount ( Vsup) is

Vsup .=. RH ICCL

Total hysteresis voltage ( Vstotal) is

Vstotal .=. Vs + Vsup

(Operation will be destabilized if RH is raised too

much.)

Note: Connect a capacitor between IC pins 1 and 2 if

VCC line impedance is high.

Share Link: