SA2002PSA 查看數據表（PDF） - South African Micro Electronic Systems
零件编号
产品描述 (功能)
比赛名单
SA2002PSA
South African Micro Electronic Systems
SA2002PSA Datasheet PDF : 14 Pages
| |||
SA2002P
sames
PIN DESCRIPTION
Pin
Designation
16
GND
5
VDD
9
VSS
15
IVP
1, 2
IIN, IIP
3
VREF
12
SCL
11
SDA
7, 8
MON, MOP
10
TEST
13
LED
4
RLOAD
6
FMO
14
DIRO
Description
Analog Ground. The voltage to this pin should be mid-way between VDD and VSS.
Positive supply voltage. The voltage to this pin is typically +2.5V if a shunt resistor is used
for current sensing or in the case of a current transformer a +5V supply can be applied.
Negative supply voltage. The voltage to this pin is typically -2.5V if a shunt resistor is used
for current sensing or in the case of a current transformer a 0V supply can be applied.
Analog Input for Voltage. The current into the A/D converter should be set at 14µARMS at
nominal mains voltage. The voltage sense input saturates at an input current of ±25µA peak.
Inputs for current sensor. The shunt resistor voltage from each channel is converted to a
current of 16µARMS at rated conditions. The current sense input saturates at an input current
of ±25µA peak.
This pin provides the connection for the reference current setting resistor. A 24kW resistor
connected to VSS set the optimum operating condition.
Serial clock output. This output is used to strobe data from the external EEPROM.
Serial data. Send and receive data from an external EEPROM.
Motor pulse outputs. These outputs can be used to drive an impulse counter or stepper
motor directly.
Test input. For normal operation this pin must be connected to VSS.
Calibration LED output. Refer to section LED Output (LED) for the pulse rate output options.
Triggers the SA2002P to reload data from the external EEPROM.
Mains zero crossing output.
Direction output. This output indicates the energy flow direction.
IIN 1
IIP 2
VREF 3
RLOAD 4
VDD
5
FMO 6
MON 7
MOP 8
16 GND
15 IVP
14 DIRO
13 LED
12 SCL
11 SDA
10 TEST
9 VSS
ORDERING INFORMATION
Part Number
SA2002PPA
SA2002PSA
Package
PDIP16
SOIC16
dr-01606
Figure 2: Pin connections: Package: PDIP16, SOIC16
http://www.sames.co.za
3/14
Share Link: