datasheetbank_Logo
数据手册搜索引擎和 Datasheet免费下载 PDF

SC16315S 查看數據表(PDF) - Silan Microelectronics

零件编号
产品描述 (功能)
比赛名单
SC16315S
Silan
Silan Microelectronics Silan
SC16315S Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
SC16315S
FUNCTIONAL DESCRIPTION
Commands
Commands determine the display mode and status of SC16315S. A command is the first byte (b0 to b7)
inputted to SC16315S via the DIN Pin after STB Pin has changed from “HIGH”to “LOW”State. For some reason,
if STB Pin is set to “HIGH”while data or commands are being transmitted, the serial communication is initialized,
and the data/commands being transmitted are considered invalid.
COMMAND1: Display mode setting commands
SC16315S provides 4 display mode settings as shown in the diagram below: As stated earlier a command is
the first one byte (b0 to b7) transmitted to SC16315S via the DIN Pin when STB is LOW”. However, for these
commands, the bits 5 to 6 (b4 to b5) are ignored, bits 7 & 8 (b6 to b7) are given a value of “0”.
The Display Mode Setting Commands determine the number of segments and grids to be used (1/4 to 1/8 duty,
12 to 8 segments). The display will be forcibly turned off and the key scanning will stop when these commands
are executed. In order to resume display, a display command “ON”must be executed. If the same mode setting
is selected, no command execution is take place, therefore, nothing happens.
When Power is turned “ON”, the 8-digit, 8-segment mode is selected.
Figure 3: display mode settings
MSB
00
LSB
b3 b2 b1 b0
Don't
relevant
Display mode settings
0000: 4 digits, 12 segments
0011: 5 digits, 11 segments
0100: 6 digits, 10 segments
0101: 7 digits, 9 segments
0110: 8 digits, 8 segments
COMMAND 2: Data setting commands
The Data Setting Commands executes the Data Write or Data Read Modes for SC16315S. The Data Setting
Command, the bits 5 and 6 (b4, b5) are ignored, bit 7 (b6) is given the value of “1”while bit 8 (b7) is given the
value of “0”. Please refer to the diagram below.
When power is turned ON, the bit 4 to bit 1 (b3 to b0) are given the value of “0”.
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.2 2004.03.01
Page 4 of 13

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]