Si4012
Table 3. Si4012 RF Transmitter Characteristics (Continued)
(TA = 25° C, VDD = 3.3 V, RL = 550 , unless otherwise noted)
Parameter
Transmit Power3
PA Edge Ramp Rate
Programmable Range
Data Rate
Symbol
Test Condition
Min
Typ
Maximum programmed Tx
—
10
power, with optimum differential
load, VDD > 2.2 V
Minimum programmed TX
—
–13
power, with optimum differential
load,
VDD > 2.2 V
Power variation vs temp and –1.0
—
supply, with optimum differential
load, VDD > 2.2 V
Power variation vs temp and –2.5
—
supply, with optimum differential
load, VDD > 1.8 V
Transmit power step size
—
0.25
from –13 to 6.5 dBm
OOK mode
0.34
—
OOK
FSK
0.1
—
0.1
—
Max Unit
—
dBm
—
dBm
0.5
dB
0.5
dB
—
dB
10.7
us
50 kbaud
100 kbaud
Notes:
1. The frequency range is continuous over the specified range.
2. The frequency step size is limited by the frequency noise.
3. Optimum differential load is equal to 4 V/(11.5mA/2 * 4/PI) = 550 Therefore the antenna load resistance in parallel
with the Si4012 differential output resistance should equal 600
6
Rev 0.1