L88MS08T 查看數據表（PDF） - SANYO -> Panasonic

零件编号

产品描述 (功能)

比赛名单

L88MS08T

4 to 12 V, 0.5 A Low Dropout Voltage Regulator with On/Off Function

SANYO -> Panasonic 

L88MS00T Series

Equivalent Circuit Block Diagram

Error

amp

ON/OFF

Control

Short circuit

protector

Thermal protector

Test Circuit (Common to L88MS00T Series)

L88MS00T

Notes: 1. Because the output capacitor COUT is set at over 100 µF to prevent oscillation at low temperatures, a capacitor that

exhibits little change in capacity with temperature variations should be used (such as a tantalum capacitor).

2. Adding capacitor Cn enables external noise suppression and ripple rejection to be improved. However, attention should

be given to system stability (phase margin).

3. To ensure operational stability, CIN, COUT, and Cn should be placed as close to the IC as possible.

4. When the strobe (STB) pin is open, output is turned on by internal bias. When the strobe function is not used, the STB

pin should be connected to GND to complete strobe operation.

5. When VIN is minus (–) and GND is plus (+) (reversed connection), excessive current flow will occur.

No.4186-6/11

Share Link: