ST7MDT2-EPB2 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

比赛名单

ST7MDT2-EPB2

A LOW-COST DEVELOPMENT PACKAGE INCLUDING A FULL REAL-TIME EMULATION BOARD

STMicroelectronics 

ST7 EPB User Manual

3 - How to Program

3

HOW TO PROGRAM

3.1

Programming Methods

Your ST7 EPB programming board is provided with at least one Zero Insertion

Force (ZIF) socket which allows the programming of packaged MCUs. In addition

to classic MCU programming using ZIF sockets, some of the newer EEPROM

memories can be programmed using the In Situ Programming (ISP) mode. ISP

mode allows the ST7 program memory contents to be updated using a standard

ST7 programming tool after the device is mounted on the application board.

Here we describe how to connect your device for programming using these

methods.

3.1.1

Installing a device for programming with the ZIF sockets

This section gives general guidelines on how to insert a device you wish to

program into the ZIF sockets on the programming board.

The online help for the Windows Epromer includes programming board layouts for

all of the ST7 EPBs.

1 Set up the EPB as described in Section 2.2 on page 7.

2 Make sure that your EPB is powered off.

3 From your host PC select Start>Programs>ST7 Tool Chain> Development

Tools>Windows Epromer to launch the Windows Epromer software program.

From the main menu bar, select Help>Hardware.

4 A list of ST7MDTx and ST72xx programming boards will appear in the online

Help window. Scroll down until you find your programming board model, and

click on it.

Caution:

5 Using the board layout that appears for your programming board, identify the

ZIF socket for your device package on the programming board.

Take care when placing the device into a socket so as not to damage the device or the board.

Forcing the MCU into the socket may result in damage to the socket.

Never insert or remove devices when the programming board is powered. Devices are

powered only during read or write operations.

9/20

Share Link: