CXL1511M
5. Measure the difference of the C-OUT output gain when 500mVp-p sine waves have been input to C-IN1
and C-IN2 at the following frequencies.
Input signal frequency
CCD1
CCD2
fp
4.429712MHz
4.425744MHz
fN
4.425806MHz
4.417869MHz
The frequency response for the outputs at fp and fN are shown in the figure below.
Gain
fN
fp
Frequency
6. Using the BPF 100kHz to 5MHz in the Sub Carrier Trap mode, measure the SN ratio on the video noise meter
when the 50% white video signal shown in the figure below is input.
178mV
321mV
143mV
7. Measure the internal clock component (3fsc: 13.300856MHz component) when no signals are input.
8. Measure the delay time of the C-OUT output when the C-IN1 signal is input.
–8–