HMS87C1304A 查看數據表（PDF） - Hyundai Micro Electronics

零件编号

产品描述 (功能)

比赛名单

HMS87C1304A

CMOS SINGLE-CHIP 8-BIT MICROCONTROLLER

Hyundai Micro Electronics 

HMS87C1304A/HMS87C1302A

HYUNDAI MicroElectronics

PSW

NEGATIVE FLAG

OVERFLOW FLAG

BRK FLAG

MSB

LSB

N V - B H I Z C RESET VALUE: 00H

CARRY FLAG RECEIVES

CARRY OUT

ZERO FLAG

INTERRUPT ENABLE FLAG

HALF CARRY FLAG RECEIVES

CARRY OUT FROM BIT 1 OF

ADDITION OPERLANDS

Figure 8-3 PSW (Program Status Word) Register

[Interrupt disable flag I]

dress.

This flag enables/disables all interrupts except interrupt

caused by Reset or software BRK instruction. All inter-

rupts are disabled when cleared to “0”. This flag immedi-

y ately becomes “0” when an interrupt is served. It is set by

r the EI instruction and cleared by the DI instruction.

a [Half carry flag H]

in After operation, this is set when there is a carry from bit 3

of ALU or there is no borrow from bit 4 of ALU. This bit

can not be set or cleared except CLRV instruction with

lim Overflow flag (V).

[Break flag B]

e This flag is set by software BRK instruction to distinguish

Pr BRK from TCALL instruction with the same vector ad-

[Overflow flag V]

This flag is set to “1” when an overflow occurs as the result

of an arithmetic operation involving signs. An overflow

occurs when the result of an addition or subtraction ex-

ceeds +127(7FH) or -128(80H). The CLRV instruction

clears the overflow flag. There is no set instruction. When

the BIT instruction is executed, bit 6 of memory is copied

to this flag.

[Negative flag N]

This flag is set to match the sign bit (bit 7) status of the re-

sult of a data or arithmetic operation. When the BIT in-

struction is executed, bit 7 of memory is copied to this flag.

18

Preliminary

Jan. 2001

Share Link: