XRT83SL28 查看數據表（PDF） - Exar Corporation
零件编号
产品描述 (功能)
比赛名单
XRT83SL28 Datasheet PDF : 47 Pages
| |||
xr
REV. 1.0.0
XRT83SL28
8-CHANNEL E1 SHORT-HAUL LINE INTERFACE UNIT
POWER AND GROUND (HOST AND HARDWARE MODES)
NAME
PIN
TYPE
DESCRIPTION
TVDD7
TVDD6
TVDD5
TVDD4
TVDD3
TVDD2
TVDD1
TVDD0
79
PWR Transmit Analog Power Supply (3.3V ±5%)
83
TVDD can be shared with DVDD. However, it is recommended that TVDD be
98
isolated from the analog power supply RVDD. For best results, use an internal
102
power plane for isolation. If an internal power plane is not available, a ferrite
bead can be used. Each power supply pin should be bypassed to ground
30
through an external 0.1µF capacitor.
26
11
7
RVDD2
RVDD1
127
PWR Receive Analog Power Supply (3.3V ±5%)
54
RVDD should not be shared with other power supplies. It is recommended that
RVDD be isolated from the digital power supply DVDD and the analog power
supply TVDD. For best results, use an internal power plane for isolation. If an
internal power plane is not available, a ferrite bead can be used. Each power
supply pin should be bypassed to ground through an external 0.1µF capacitor.
DVDD2
129
PWR Digital Power Supply (3.3V ±5%)
DVDD1
52
DVDDcore
93
DVDD should be isolated from the analog power supplies except for TVDD.
For best results, use an internal power plane for isolation. If an internal power
plane is not available, a ferrite bead can be used. Every two DVDD power sup-
ply pins should be bypassed to ground through at least one 0.1µF capacitor.
AVDD
16
PWR Analog Power Supply (3.3V ±5%)
AVDD should be isolated from the digital power supplies. For best results, use
an internal power plane for isolation. If an internal power plane is not available,
a ferrite bead can be used. Each power supply pin should be bypassed to
ground through at least one 0.1µF capacitor.
TGND7
TGND6
TGND5
TGND4
TGND3
TGND2
TGND1
TGND0
77
GND Transmit Analog Ground
85
It’s recommended that all ground pins of this device be tied together.
96
104
32
24
13
5
RGND2
RGND1
126
GND Receive Analog Ground
55
It’s recommended that all ground pins of this device be tied together.
DGND2
128
DGND1
53
DGNDcore
88
GND
Digital Ground
It’s recommended that all ground pins of this device be tied together.
AGND
18
GND Analog Ground
It’s recommended that all ground pins of this device be tied together.
9
Share Link: 