CLE400F 查看數據表（PDF） - Clairex Technologies, Inc
零件编号
产品描述 (功能)
比赛名单
CLE400F Datasheet PDF : 1 Pages
| |||
CLE400F
Four leaded Multiple Emitter Chip
Surface Mount Package
® Clairex
Technologies, Inc.
March, 2002
0.056 (1.42)
002.502(50.(603.6)3)
0.012 (0.30)
0.1100.1(120.81(2) .81)
PIN 1 MARK
2
1
0.063 (1.60)
0.275 ± 0.010
(6.99 ± 0.25)
0.063 (1.60)
0.006 (0.15)
0.028 (0.71)
0.006 (0.15)
0.056 (1.42)
234
0.075 (1.89)
3
4
0.038 (0.97)
All dimensions are in inches (millimeters).
Unless otherwise indicated, tolerance is ± 0.005 (0.12)
0.032 (0.81)
1
00..006669(0(1.6.78)5)
features
absolute maximum ratings (TA = 25°C unless otherwise stated)
• ±70° emission angle
storage temperature........................................................................-40°C to +100°C
• wide variety of chip combinations
• wide variety of lenses and apertures
operating temperature.....................................................................-40°C to +100°C
lead soldering temperature(1)...........................................................................260°C
continuous forward current(2)..............................................................20mA/per chip
description
The CLE400F can contain three 850
nm IRED chips which feature double/
peak forward current (1.0ms pulse width, 10% duty cycle) .................................. 1A
reverse voltage..................................................................................................... 5V
continuous power dissipation(3) .......................................................................80mW
double heterojunction (DDH)
construction for increased quantum
efficiency and reliability. This device
is one example of a very broad line of
devices made possible by four leaded
notes:
1. For 5 seconds maximum
2. Derate linearly 0.213mA/°C from 25°C free air temperature to TA = +100°C.
3. Derate linearly 0.85mW/°C from 25°C free air temperature to TA = +100°C.
package configuration. One to three
chips can be attached. Multiple chip
devices can be series or parallel
connected. Wavelengths can range
from ultra-violet (390nm) through the
visible spectrum into the near infrared
(940nm). Also different lenses,
apertures and lead configurations
are available. The standard lensing is
clear epoxy.
electrical characteristics (TA = 25°C unless otherwise noted)
symbol parameter
min typ max units test conditions
PO
Total power output(4)
9.0
13.0
-
mW
IF = 60mA
(total cathode current)
VF
Forward voltage
-
-
1.4
V IF = 20mA per chip
IR
Reverse current
-
-
10
µA VR = 5V
λp
Peak wavelength emission
-
850
-
nm IF = 20mA
BW
Spectral bandwidth at half power points
-
60
-
nm IF = 20mA
θHP
Emission angle at half power points
-
140
-
deg. IF = 20mA
note: 4. Power output is measured in an integrating sphere.
Clairex reserves the right to make changes at any time to improve design and to provide the best possible product.
Revised 4/17/07
Clairex Technologies, Inc.
Phone: 972-265-4900
1301 East Plano Parkway
Fax: 972-265-4949
Plano, Texas 75074-8524
www.clairex.com
Share Link: 