HMS91C7432 查看數據表（PDF） - Hynix Semiconductor

零件编号

产品描述 (功能)

比赛名单

HMS91C7432

HMS91C7432 features and functions

Hynix Semiconductor 

Hynix semiconductor

Specifications of HMS91C7432

Continue of Table 3. Listing of Control Code

0x83

0x84

0x85

0x86

Quit ISP – Host’s command in Simple Command mode. Instruct

the HMS91C7432 to end the current ISP session. When the

command is accepted, HMS91C7432 will run the Disconnect

process automatically and report to the host by using Control

Code 0x02 complex command. The whole Disconnect process

consists of the following steps, and Connection Status will be

reported on each step.

1. Quit the ISP internet connection

2. Disconnect the telephone line

3. Hang up the modem and modem go On Hook

The Quit process ends when the modem responds with On Hook

OK, or in any cases a connection failure occurs.

Login SMTP Server - Host’s command in Simple Command

mode. Instruct the HMS91C7432 to login to the dedicated SMTP

server. Upon the command is accepted, HMS91C7432 will run the

following steps, and Connection Status will be reported on each

step.

1. Run DNS protocol to resolve for the SMTP server’s IP

address.

2. Register to the SMTP server.

The Login SMTP process ends when the SMTP server returns an

OK response code, or in any cases a Logon failure occurs.

Quit SMTP Server - Host’s command in Simple Command mode.

Instruct the HMS91C7432 to end the current SMTP session. Upon

the command is accepted, HMS91C7432 will quit the SMTP

Server and keep ON LINE (keep connection with the internet).

Quit SMTP OK will be reported to the host by using Control Code

0x02 complex command.

Send Mail Request - Host’s command in Simple Command

mode. Instruct the HMS91C7432 to get permission from the

SMTP server for sending mail. Upon the command is accepted,

HMS91C7432 will run the following steps, and Connection Status

will be reported on each step.

1. Send the “Send Mail” request to the SMTP server

2. Pass Sender email address; Recipient email address

to the SMTP server for validation.

3. Wait for permission to send the mail’s body.

When the SMTP server accept all the mail info and an OK to send

is received, HMS91C7432 will issue Ready to send response

using Control Code 0x02 to the host. DO NOT send the mail body

before this response is issued.

Host to

HMS91C7432

Host to

HMS91C7432

Host to

HMS91C7432

Host to

HMS91C7432

12

Share Link: