PE1000D-10F 查看數據表（PDF） - PerkinElmer Inc
零件编号
产品描述 (功能)
比赛名单
PE1000D-10F Datasheet PDF : 2 Pages
| |||
PE1000D-10F and PE1000D-10UV
Operational Specifications
Description
Nominal
Range
Power
1000 watts
600-1050 watts
Current
50 amps (DC)
30-56 amps (DC)
Operating Voltage
20 volts (DC)
15-24 volts (DC)
Ignition Voltage
25 kilovolts (recommended minimum)
Temperature
150º C (maximum)
Lifetime*
1000 hours (500 hour warranty)
* End of lamp life is defined as 50% of initial output.
Output at Nominal Power
F= UV Filtered Output/ UV = UV Enhanced Output
Description
PE1000D-10F
Radiant Output*
245 watts
UV Output*
13 watts
IR Output*
135 watts
Visible Output*
23500 Lumens
Color Temperature
5900 Kelvin
Peak Instabilities
4%
Spot Size at Crossover .14” at 50% pts
Spot Size at Crossover .33” at 10% pts
PE1000D-10UV
245 watts
24 watts
132 watts
21000 Lumens
5050 Kelvin
4%
.14” at 50% pts
.33” at 10% pts
*These values indicate total output in all directions.
Wavelengths = UV<390nm, IR>770nm, Visible 390nm to 770nm.
** Beam Geometry defined as half angle at 10% PTS after 01/100/1000 hours.
Dimensions
1.820 (46.23)
.394
(1.0)
1.330(33.78)
.332
(8.43)
.62
(15.8)
1.389
(35.28)
1.375
(34.93)
1.246 (31.65)
.008 (.203)
.278 (7.06)
2.998 (76.15)
.604 (15.3)
.156 (3.96)
1.434
(36.42)
2.587 (65.71)
M=1.70388
N=0.9321
Focal Point
Cathode
Reflector Edge
CL Ellipse
Physical Specifications
Description
Arc Gap
Reflector Geometry
Weight
Window Diameter
Specification
.062 inch (1.58 mm)
Ellipsoidal 1=X2/M2 +Y2/N2
687 grams
1.375 inch (34.92 mm)
Focused Output
Description
Visible Output*
12mm aperture
9mm aperture
6mm aperture
3mm aperture
21000 Lumens
16250 Lumens
13000 Lumens
4800 Lumens
* Nominal values at 1000 watts after 2 hour burn-in
Total Output
200 watts
154 watts
120 watts
47 watts
Notes
1. Lamp must not be operated with window facing upwards within
45º of vertical.
2. Seal temperature must not exceed 150º C.
3. Current/power regulated power supplies and PerkinElmer lamp
housing units are recommended.
4. Lamp must be operated within recommended current and power
range. Over powering may lead to arc instability, hard starting
and premature aging.
5. CERMAX lamps are much safer lamps to use than their quartz
xenon arc lamp equivalents. However, caution must be practiced
when operating lamps because they are under high pressure,
require high voltage, reach temperatures up to 200º C, and their
IR and UV radiation can cause skin burns and eye damage.
Read hazard sheet included with each lamp shipment.
Spectral Output
F
UV
F + HOT MIRROR
100
80
60
40
20
0
200
300 400 500
600 700
800
900 1000 1100
WAVELENGTH (NM)
PerkinElmer welcomes inquiries about special lamps. We would be pleased to discuss the requirements of your application and the feasibility of
designing a lamp specifically suited to your needs.
For more information e-mail us at opto@perkinelmer.com or visit our web site at www.perkinelmer.com/opto.
All values are nominal; specifications subject to change without notice.
USA:
Europe:
Asia:
PerkinElmer Optoelectronics
PerkinElmer Optoelectronics
PerkinElmer Optoelectronics
44370 Christy St.
GmbH
47 Ayer Rajah Crescent #06-12
Fremont, CA 94538
Wenzel-Jaksch-Str. 31
Singapore 139947
Phone: (510) 979-6500
65199 Wiesbaden
Phone: +65 775 2022
Fax: (510) 687-1140
Toll Free: (800) 775-6786
Germany
Phone: +49 611 492 0
Fax: +65 775 1008
.
Fax: +49 611 492 369
© 2000 PerkinElmer inc. All rights reserved.
DS-158 Rev C 1101
www.perkinelmer.com/opto
Share Link: 