PS9213(2005) 查看數據表（PDF） - California Eastern Laboratories.

零件编号

产品描述 (功能)

比赛名单

PS9213
(Rev.:2005)

1 Mbps, OPEN COLLECTOR OUTPUT HIGH CMR, INTELLIGENT POWER MODULE 5-PIN SOP PHOTOCOUPLER

California Eastern Laboratories. 

PS9213

NOTES ON HANDLING

1. Recommended soldering conditions

(1) Infrared reflow soldering

• Peak reflow temperature

• Time of peak reflow temperature

• Time of temperature higher than 220°C

• Time to preheat temperature from 120 to 180°C

• Number of reflows

• Flux

260°C or below (package surface temperature)

10 seconds or less

60 seconds or less

120±30 s

Three

Rosin flux containing small amount of chlorine (The flux with a

maximum chlorine content of 0.2 Wt% is recommended.)

Recommended Temperature Profile of Infrared Reflow

180˚C

120˚C

120±30 s

(preheating)

(heating)

to 10 s

to 60 s

260˚C MAX.

220˚C

Time (s)

(2) Wave soldering

• Temperature

• Time

• Preheating conditions

• Number of times

• Flux

260°C or below (molten solder temperature)

10 seconds or less

120°C or below (package surface temperature)

One (Allowed to be dipped in solder including plastic mold portion.)

Rosin flux containing small amount of chlorine (The flux with a maximum chlorine

content of 0.2 Wt% is recommended.)

(3) Soldering by Soldering Iron

• Peak Temperature (lead part temperature)

• Time (each pins)

• Flux

350°C or below

3 seconds or less

Rosin flux containing small amount of chlorine (The flux with a

maximum chlorine content of 0.2 Wt% is recommended.)

(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead

(b) Please be sure that the temperature of the package would not be heated over 100°C

Data Sheet PN10535EJ02V0DS

11

Share Link: