ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 3. Static Electrical Characteristics (continued)
Unless specified otherwise: 8.0 V VPWR 36 V, 3.0 V VDD 5.5 V, - 40 C TA 125 C, GND = 0 V. Typical values are
average values evaluated under nominal conditions TA = 25 °C, VPWR = 28 V & VDD = 5.0 V, unless specified otherwise.
parameter
Symbol
Min
Typ
Max
Unit
ELECTRICAL CHARACTERISTICS OF THE OUTPUT STAGE (HS0 AND HS1) (CONTINUED)
EcoSmR1peOnustaptuiotnC(1u9r)reant toSutepnustincugrErernrot rle(v%el(l(eSveenl)seafrteartioofCfsSeRt 1 selected):
ESR1_ERR(Comp)
TJ=-40 C
1.5 A
-10
–
0.5 A
-11
–
0.25 A
-18
–
0.15 A
TJ=125C
-29
–
1.5 A
0.5 A
0.25 A
0.15 A
TJ=25 to 125C
-8.0
–
-10
–
-12
–
-16
–
1.5 A
0.5 A
0.25 A
0.15 A
-8.0
–
-10
–
-13
–
-21
–
%
10
11
18
29
8.0
10
12
16
8.0
10
13
21
EunScRo0mOpuetnpsuat tCedu(r2re0)n)taSt eonustpinugtsECrruorrreinntplaervaellle(Sl menosdee
(%,
ratio
CSR0
selected):
ESR0_ERR_PAR
TJ=-40 C
6.0 A (per channel)
-10
–
3.0 A (per channel)
-11
–
TJ=125C
6.0 A (per channel)
-8.0
–
3.0 A (per channel)
-8.0
–
TJ=25 to 125C
6.0 A (per channel)
-8.0
–
3.0 A (per channel)
-8.0
–
%
10
11
8.0
8.0
8.0
8.0
Notes:
19. See note (20), but with ICSNS_MEAS obtained after compensation of I_LOAD_ERR_RAND (see Activation and Use of Offset Compensation).
Further accuracy improvements can be obtained by performing a 1 or 2 point calibration.
20. ESRx_ERR=(ICSNS_MEAS / ICSNS_MODEL) -1, with ICSNS_MODEL = (I(HS[x])+ I_LOAD_ERR_SYS) * CSRx , (I_LOAD_ERR_SYS defined above, see
section Current Sense Error Model). With this model, load current becomes: I(HS[x]) = ICSNS / CSRx - I_LOAD_ERR_SYS
10XSD200
12
Analog Integrated Circuit Device Data
Freescale Semiconductor