Electrical Characteristics (Cont’d): (TA = +25°C unless otherwise specified)
Parameter
Load Bias Current Change
Output Noise Voltage
Ripple Rejection Ratio
Minimum Input/Output
Voltage Difference
Output Impedance
Output Short Circuit Current
Peak Output Current
Output Voltage Temperature
Coefficient
Symbol
Test Conditions
∆IBIAS(L)
Vno
RR
VDIF(min)
IO = 5mA to 1.5A, TJ = 25°C
f = 10Hz to 100kHz
VI = 12V to 22V, IO = 100mA,
f = 120Hz
IO = 1A, TJ = 25°C
ZO
IO(short)
IO(peak)
∆VO/TA
f = 1kHz
VI = 26V, TJ = 25°C
TJ = 25°C
IO = 5mA, TJ = 0° to +125°C
Min Typ Max Unit
– – 0.5 mA
– 57 – µV
56 – – dB
–2–
V
– 16 – mΩ
– 700 – mA
–2–
A
– –0.5 – mV/°C
Note 1. The specified condition, TJ = +25°C, means that the test should be carried out with the test
time so short (within 10ms) that the drift in characteristic value due to the rise in chip junction
temperature can be ignored.
Note 2. When not specified, VI = 15V, IO = 500mA, CI = 0.33µf, and CO = 0.1µf.
.420 (10.67)
Max
.110 (2.79)
.147 (3.75)
Dia Max
.500
(12.7)
Max
.070 (1.78)
Max
VIN
.100 (2.54)
.250 (6.35)
Max
.500
(12.7)
Min
VOUT
GND/Tab